Mechanical alloying and subsequent heat treatment of Ag-Zn powders

Guzman D.; Rivera O.; Aguilar C.; Ordonez, S; Martínez C; Serafini D.; Rojas P.

Abstract

Microstractural evolution during mechanical alloying of Ag and Zn, and subsequent heat treatments were investigated. The mechanical alloying was carried out in a SPEX 8000D miller. The microstructural characterization was obtained by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The thermal behavior was studied using differential scanning calorimetry (DSC). Based on the results obtained, it can be concluded that at the early stages of milling was possible to detect the epsilon, beta, beta', alpha solid solutions and remaining Zn. Later, the epsilon, beta, beta' and Zn phases disappeared while the Zn concentration of the alpha solid solution was strongly increased. After 7.2 ks of milling, the mechanical alloying process reached a steady state. During this period, both the composition and crystallite size of the alpha solid solution remained practically unchanged. On the other hand, subsequent heat treatments of milled powders showed that the alpha solid solution could also be obtained by the combination of mechanical alloying and heat treatment. Finally, the evolution of the microstructure during milling and annealing was combined to propose an optimal processing route in order to obtain a alpha solid solution.

Más información

Título según WOS: Mechanical alloying and subsequent heat treatment of Ag-Zn powders
Título según SCOPUS: Mechanical alloying and subsequent heat treatment of Ag-Zn powders
Título de la Revista: TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
Volumen: 23
Número: 7
Editorial: Elsevier
Fecha de publicación: 2013
Página de inicio: 2071
Página final: 2078
Idioma: English
URL: http://linkinghub.elsevier.com/retrieve/pii/S1003632613626989
DOI:

10.1016/S1003-6326(13)62698-9

Notas: ISI, SCOPUS