Growth of different nanostructures of Cu2O (nanothreads, nanowires, and nanocubes) by simple electrolysis based oxidation of copper

Singh Dinesh Pratap; Neti, Nageswara Rao; Sinha, A. S. K.; Srivastava, Onkar Nath

Abstract

Cuprous oxide (Cu2O) nanostructures have been synthesized by anodic oxidation of copper through a simple electrolysis process employing plain water (with ionic conductivity similar to 6 mu S/m) as an electrolyte. No special electrolytes, chemicals, and surfactants are needed. The method is based on anodization pursuant to the simple electrolysis of water at different voltages. Platinum was taken as cathode and copper as anode. The applied voltage was varied from 2 to 10 V. The optimum anodization time of about I h was employed for each case. Two different types Of Cu2O nanostructures have been found. One type was delaminated from copper anode and collected from the bottom of the electrochemical cell and the other was located on the copper anode itself. The nanostructures collected from the bottom of the cell are either nanothreads embodying beads of different lengths and diameter similar to 10-40 nm or nanowires (length similar to 600-1000 nm and diameter similar to 10-25 nm). Those present on the copper anode were nanoblocks with a preponderance of nanocubes (nanocube edge similar to 400 nm). The copper electrode served as a sacrificial anode for the synthesis of different nanostructures. A tentative mechanism for the formation Of Cu2O nanostructures has been suggested. The present work represents the first such attempt where Cu2O nanostructures were formed under the oxidation induced by as simple a process as electrolysis of plain water. Both anodization potential and time influence the morphology of nanostructures Of Cu2O. Thus, nanothreads are formed at 6 V during 15-30 min, whereas nanowires result when anodization time is extended to 45-60 min. Also two different types Of Cu2O nanostructures, one which is present in the solution (nanothreads and nanowires) and the other which is located on the copper anode (nanocubes), are synthesized in the same electrolysis run. The optical band gap as calculated from the UV-visible absorption spectra of the nanothreads and nanowires corresponds to 2.61 and 2.69 eV, respectively, which is larger than the known band gap (2.17 eV) of bulk Cu2O.

Más información

Título según WOS: ID WOS:000245005500016 Not found in local WOS DB
Título de la Revista: JOURNAL OF PHYSICAL CHEMISTRY C
Volumen: 111
Número: 4
Editorial: AMER CHEMICAL SOC
Fecha de publicación: 2007
Página de inicio: 1638
Página final: 1645
DOI:

10.1021/jp0657179

Notas: ISI