A lab-scale rotary kiln for thermal treatment of particulate materials under high concentrated solar radiation: Experimental assessment and transient numerical modeling

Gallo, Alessandro; Alonso, Elisa; Pérez-Rábago, Carlos; Fuentealba, Edward; Roldán, María Isabel

Keywords: Concentrating solar heatRotary kilnsIndustrial applicationsSolar thermal receiver

Abstract

Rotary kilns are worldwide used for industrial processes that involve thermal treatments of particulate materials. However, a great amount of fossil fuels is employed in such processes. As alternative, solar rotary kilns are considered for this application due to their versatility and potential to substitute traditional fossil-fuel driven devices. In order to boost the development of this technology, efforts have to be focused on the control of the particle temperature during the treatment. In this context, a lab-scale rotary kiln was built and tested using a 7-kW(e) high-flux solar simulator at University of Antofagasta. It was conceived to treat particulate materials of different nature and it is able to reach temperatures higher than 800 degrees C under different operation strategies. Silicon carbide was selected for initial tests because it is inert, endures high temperatures (up to 1600 degrees C) and it has been proposed as thermal storage vector in several researches on concentrated solar power. In a first stage, the empty kiln was preheated up to about 800 degrees C, reaching a steady state in less than three hours and with a power of approximately 370 W entering the kiln cavity. Afterwards, 43 g of silicon carbide were introduced in the furnace and the system was heated again up to a second steady state above 800 degrees C. In this stage, particles showed a fast increment of their temperature and exceeded 700 degrees C in less than three minutes after loading. A one-dimensional transient numerical model was also developed to perform the thermal analysis of the kiln and the estimation of both the particle temperature and the system efficiency. Numerical results showed good agreement with experimental data and thermal losses could be quantified in detail. Therefore, the model was also used to predict the thermal behavior of a solar rotary kiln working in batch mode.

Más información

Título según WOS: A lab-scale rotary kiln for thermal treatment of particulate materials under high concentrated solar radiation: Experimental assessment and transient numerical modeling
Título según SCOPUS: A lab-scale rotary kiln for thermal treatment of particulate materials under high concentrated solar radiation: Experimental assessment and transient numerical modeling
Título de la Revista: SOLAR ENERGY
Volumen: 188
Editorial: PERGAMON-ELSEVIER SCIENCE LTD
Fecha de publicación: 2019
Página de inicio: 1013
Página final: 1030
Idioma: English
DOI:

10.1016/j.solener.2019.07.006

Notas: ISI, SCOPUS