Economic model predictive control for a rougher froth flotation cell using physics-based models
Abstract
The development of an economic model predictive control (E-MPC) strategy is presented. The strategy uses a novel dynamic flotation model that incorporates the physics of the froth phase in a flotation cell. The dynamic model was previously calibrated and validated using experimental data.Sensitivity analyses were conducted to select a suitable objective function that accounted for both process economics and control variable sensitivities. While the ultimate goal of a rougher flotation cell is to maximise the metallurgical recovery at a steady state for a specified minimum grade, it was evident that the incorporation of air recovery dynamics (which can be measured in real-time) and concentrate grade dynamics (calculated through first-principle models) led to the best results. The addition of a dynamic variable that can be easily measured online, i.e. air recovery, offers great potential to improve plant performance in existing froth flotation systems. Furthermore, a minimum concentrate grade was imposed in the E-MPC strategy. This acts as an economic constraint as it allows the metallurgical recovery to be optimised while ensuring that concentrate grade requirements are met.The dynamic optimisation problem for the E-MPC strategy was discretised using orthogonal collocations, and was implemented in Matlab using automatic differentiation via CasADi. Two typical manipulated variables were considered: air flowrate and pulp height setpoints. Based on laboratory-scale data, the implementation of the E-MPC strategy resulted in improvements ranging from +8 to +22 % in metallurgical recovery, while maintaining the specified grade. This is therefore an encouraging control strategy to explore in larger flotation systems.
Más información
Título según WOS: | ID WOS:000951797500001 Not found in local WOS DB |
Título de la Revista: | MINERALS ENGINEERING |
Volumen: | 196 |
Editorial: | PERGAMON-ELSEVIER SCIENCE LTD |
Fecha de publicación: | 2023 |
DOI: |
10.1016/j.mineng.2023.108050 |
Notas: | ISI |