Effect of Starch Variety and Environmental Conditions on the Aerobic Biodegradation of Citric Acid-Compatibilized Thermoplastic Starch/Polylactic Acid Blends
Abstract
In this study, the aerobic degradation of sweet potato (Ipomoea batatas; SP) and diamond yam (Dioscorea rotundata; DY) thermoplastic starch (TPS) blends, combined with polylactic acid (PLA) and varying ratios of citric acid (CA) as a crosslinker, was investigated in compost and seawater environments. After 50 d of composting, weight losses in the SP-TPS/CA/PLA blends were 56.9%, 52.3%, and 77.5%, while those of DY-TPS/CA/PLA were 55.8%, 52.2%, and 62.2% for 0%, 1%, and 5% CA, respectively. In seawater, the SP-TPS/CA/PLA blends showed weight losses of 52.9%, 46.8%, and 61.5%, and the DY-TPS/CA/PLA blends lost 35.2%, 32.1%, and 43.9% for the same CA ratios, respectively. In both media, SEM revealed structural damage, holes, cracks, and changes in coloration, reflecting microbial activity. Additionally, in compost and seawater, TGA results showed that PLA remained the predominant component after 50 d, as most of the degradation occurred on TPS due to its amorphous structure and higher hydrophilicity. In both media, the SP-TPS/CA5/PLA and DY-TPS/CA5/PLA blends exhibited faster degradation, whereas SP-TPS/CA1/PLA and DY-TPS/CA1/PLA displayed higher stability and lower disintegration. Additionally, all blends required over 50 d to degrade completely, as evidenced by the absence of a plateau phase in the biodegradability curves. Statistical analysis showed that, in seawater, the degradation behavior of the blends was similar to cellulose. However, the CA ratio had a greater impact on the compost degradation of the blends with SP-TPS than on DY-TPS. Therefore, the critical factors influencing the degradation of these blends are the starch source and the CA ratio.
Más información
Título según WOS: | Effect of Starch Variety and Environmental Conditions on the Aerobic Biodegradation of Citric Acid-Compatibilized Thermoplastic Starch/Polylactic Acid Blends |
Título de la Revista: | POLYMERS |
Volumen: | 17 |
Número: | 10 |
Editorial: | MDPI |
Fecha de publicación: | 2025 |
Idioma: | English |
URL: | https://www.mdpi.com/2073-4360/17/10/1295 |
DOI: |
10.3390/polym17101295 |
Notas: | ISI - WOS |