Off-axis pulsed laser deposition system for epitaxial oxide growth on substrates up to 2 inches in diameter
Abstract
A novel off-axis pulsed-laser deposition (PLD) system for ferroelectric oxide thin films has been developed. The substrates are mounted "upside-down" and are rotating. The maximum substrate size is 2 inches in diameter. The optical and structural properties of the grown BaTiO(3) films are compared to the films produced by an on-axis PLD system. The stoichiometry and thickness were checked with Rutherford backscattering spectrometry (RBS). The crystalline quality and orientation were investigated with X-ray diffraction (XRD) and Rutherford backscattering spectrometry in channeling configuration (RBS/C). Using atomic force microscopy, the rms surface roughness was measured. The BaTiO(3) films grown on MgO form a planar optical waveguide. The optical losses and the refractive indices of these waveguides were determined with a prism coupling setup. Films grown on Id x 10 mm(2) MgO (100) substrates in on-axis geometry show optical waveguide losses less than 3 dB/cm.
Más información
| Título según WOS: | ID WOS:000085530400171 Not found in local WOS DB | 
| Título de la Revista: | APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING | 
| Volumen: | 69 | 
| Editorial: | SPRINGER HEIDELBERG | 
| Fecha de publicación: | 1999 | 
| Página de inicio: | S779 | 
| Página final: | S781 | 
| DOI: | 
 10.1007/s003390051528  | 
| Notas: | ISI |