PDI - Resultado de Búsqueda

Iván Ignacio Navarrete Leschot

Profesor Asistente

Pontificia Universidad Católica de Chile

Santiago, Chile

Science and technology of cement based materials, and microstructure of materials. Specifically, rheology of concrete and cement paste, workability of concrete, high performance concrete and the use of supplementary cementitious materials.

Ingeniería Civil, PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE. Chile, 2015
Ingeniero civil con mención en diseño y construcción de obras, PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE. Chile, 2015
Ingeniería Civil, PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE. Chile, 2012
Ingeniería Civil, PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE. Chile, 2021
Civil Engineering, UNIVERSITY OF NOTRE DAME. Estados Unidos, 2021

Ayudante Part Time

PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE

Ingeniería

Santiago, Chile

2012 - 2019
Profesor Instructor Asistente Part Time

PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE

Ingeniería

Santiago, Chile

2018 - 2018
Teaching Assistant Part Time

UNIVERSITY OF NOTRE DAME

Engineering

Notre Dame, Chile

2019 - A la fecha
Lab Instructor of Record Part Time

UNIVERSITY OF NOTRE DAME

Engineering

Notre Dame, Estados Unidos

2019 - 2019
Instructor of Record Part Time

UNIVERSITY OF NOTRE DAME

Engineering

Notre Dame, Estados Unidos

2021 - A la fecha
Profesor Asistente Full Time

UNIVERSIDAD DIEGO PORTALES

Facultad de Ingeniería y Ciencias

Santiago, Chile

2021 - 2022
Profesor Asistente Full Time

PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE

Facultad de Ingeniería

Santiago, Chile

2023 - A la fecha

Practica profesional Full Time

Salfa Montajes

Santiago, Chile

2014 - 2014
Investigador Asociado Full Time

Pontificia Universidad Católica de Chile

Santiago, Chile

2016 - 2016


Assessing the effect of test parameters on the determination of the rheological behavior of calcium sulfoaluminate cement pastes Silvestro, Laura; Araujo, Alamanda; Krann, Maira; Lima, Geannina; Ribeiro, Rodrigo Scoczynski; Gleize, Philippe Jean Paul Article ISI CONSTRUCTION AND BUILDING MATERIALS (2024)
High-performance and low-cost electrochemical reactor for limestone decarbonation applied to clinker production - A validation at laboratory scale Gonzalez, Marcelo; Canales, Roberto Article ISI JOURNAL OF CLEANER PRODUCTION (2024)
Influences of Recycled Polyethylene Terephthalate Microplastic on the Hygrothermal and Mechanical Performance of Plasterboard with Polymethylhydrosiloxane Content Romano-Matos, Victoria; Vera, Sergio Article ISI MATERIALS (2024)
Comparison of the electrochemical decarbonation of different-grade limestones used in cement manufacturing Gonzalez, Marcelo Article ISI CEMENT AND CONCRETE RESEARCH (2023)
Predicting the evolution of static yield stress with time of blended cement paste through a machine learning approach Lopez, Mauricio Article ISI CONSTRUCTION AND BUILDING MATERIALS (2023)
Replacement of pozzolanic blended cement by supplementary cementitious materials: Mechanical and environmental approach Valdes, Juan; Lopez, Mauricio Article ISI CONSTRUCTION AND BUILDING MATERIALS (2023)
RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-rheometers, mixtures and procedures Feys, Dimitri; Sonebi, Mohammed; Amziane, Sofiane; Djelal, Chafika; El-Cheikh, Khadija; Fataei, Shirin; Greim, Markus; Ivanova, Irina; Keller, Helena; Khayat, Kamal; et al. Article ISI MATERIALS AND STRUCTURES (2023)
Effect of supplementary cementitious materials on viscosity of cement-based pastes Lopez, Mauricio Article ISI CEMENT AND CONCRETE RESEARCH (2022)
Air Bubbles as an Admixture for Printable Concrete: A Review of the Rheological Effect of Entrained Air Lopez, Mauricio Article ISI 3D PRINTING AND ADDITIVE MANUFACTURING (2021)
Flue gas desulfurization (FGD) fly ash as a sustainable, safe alternative for cement-based materials Lopez, Mauricio Article ISI JOURNAL OF CLEANER PRODUCTION (2021)
Multi-layer casting of self-consolidating concrete: Influence of mortar rheology and casting parameters on the inter-layer bond strength Lopez, Mauricio Article ISI CONSTRUCTION AND BUILDING MATERIALS (2021)
Impact of physical and physicochemical properties of supplementary cementitious materials on structural build-up of cement-based pastes Article SCOPUS Cement and Concrete Research (2020)
Understanding the effect of porosity on the mechanical and thermal performance of glass foam lightweight aggregates and the influence of production factors Navarrete I. Article ISI SCOPUS CONSTRUCTION AND BUILDING MATERIALS (2019)
Flexural behavior of stratified reinforced concrete: construction, testing, analysis, and design Navarrete, Ivan; Kurama, Yahya Article ISI SCOPUS MATERIALS AND STRUCTURES (2017)
Sustainable decision-making through stochastic simulation: Transporting vs. recycling aggregates for Portland cement concrete in underground mining projects Azúa G. Article ISI SCOPUS JOURNAL OF CLEANER PRODUCTION (2017)
Understanding the relationship between the segregation of concrete and coarse aggregate density and size Navarrete, Ivan Article ISI SCOPUS CONSTRUCTION AND BUILDING MATERIALS (2017)
Estimating the segregation of concrete based on mixture design and vibratory energy Article ISI SCOPUS CONSTRUCTION AND BUILDING MATERIALS (2016)


Acopa: escalamiento, validación y empaquetamiento de planta industrial automatizada para la producción en frío de áridos artificiales en base a cenizas industriales para hormigones prefabricados Vera, Sergio Eduardo Proyecto (2024)
Bases de diseño para la utilización de fibras como refuerzo en elementos estructurales de hormigón sometidos a flexión Proyecto (2024)
ENHANCING THE RESILIENCE OF 3D PRINTED CONCRETE BEHAVIOR TO ENVIRONMENTAL CONDITIONS USING INDUSTRIAL WASTES Proyecto (2024)
Desarrollo de especificaciones técnicas para la construcción acelerada de pavimentos de hormigón aeropuertarios, urbanos e interurbanos: hacia procesos constructivos industrializados, más sustentables y productivos Gonzalez, Marcelo Proyecto (2021)
Propuesta de nuevo método de fabricación de cemento Portland, reduciendo significativamente las emisiones de CO2 y con generación de hidrógeno verde como subproductontos de hormigón aeropuertarios, urbanos e interurbanos: hacia procesos constructivos industrializados, más sustentables y productivos Proyecto (2021)
Valorización de Cenizas Volantes de Termoeléctricas como áridos artificiales para la construcción: validación de un proceso de fabricación de pellet con mínimo consumo de energía como materia prima para la industria del hormigón Proyecto (2021)
Understanding and Improving Time-Temperature Dependence of Cement-Based Materials Rheology for Construction 3D Printing Proyecto (2019)
Hormigón Estratificado para Estructuras en Capas FONDEF (VIU16P0094) Proyecto 2016-2017 Director(a)
Understanding Stratification and Structural Behavior of Engineered Stratified Concrete (ESC) Pontificia Universidad Católica de Chile y University of Notre Dame (ND 201504) Proyecto 2016-2017 Investigador(a)
Soluciones de Muros de Envolvente para Casas de Hormigón Bajo Criterios de Desempeño Energitérmicos, Estructurales y Constructivos FONDEF (D10I1086) Proyecto 2012-2015 Tesista