PDI - Resultado de Búsqueda

Luciano Chiang

Profesor

Pontificia Universidad Catolica de Chile

Santiago, Chile

Dinámica de Sistemas Electromecánicos Sistemas de Energía Renovable No Convencional de Pequeña Escala Sistemas de Perforación de Rocas

Ingeniería Mecánica, STANFORD UNIVERSITY. Estados Unidos, 1989
Ingeniería Eléctrica, STANFORD UNIVERSITY. Estados Unidos, 1988
Ingeniería Mecánica, STANFORD UNIVERSITY. Chile, 1983

Profesor Titular Full Time

PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE

Ingeniería

Santiago, Chile

1990 - At present


A general architecture for electric power management of small scale NCRE converters Hernández, Franco A.; Chiang, Luciano E.; Corbalán, Patricio E. Article ISI Energy for Sustainable Development (2017)
A design tool and fabrication guidelines for small scale cost effective horizontal axis hydrokinetic turbines Alvaro Muñoz, Luciano Chiang Article Energy for Renewable and Sustainable Development (2014)
Discrete Crack Model for simulating rock comminution processes with the Discrete Element Method Estay, Danilo A.; Chiang, Luciano E. Article ISI International Journal for Rock Mechanics and Mining Sciences (2013)
Teaching Robotics with a reconfigurable 3D multibody dynamics simulator Chiang, Luciano E. Article ISI COMPUTER APPLICATIONS IN ENGINEERING EDUCATION (2010)
Location and classification of moving fruits in real time with a single color camera Reyes, José P.; Chiang, Luciano E. Article ISI Chilean journal of agricultural research (2009)
A 3D FEM methodology for simulating the impact in rock drilling hammers Chiang, Luciano E.; Elías, Dante Article ISI INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2008)
Optimal trajectory planning for a redundant mobile manipulator with non-holonomic constraints performing push-pull tasks Puga, José P.; Chiang, Luciano E. Article ISI (2008)
Automatic dynamic modeling and simulation of underwater vehicles for virtual prototyping Chiang, Luciano E.; Nuñez, Javier Article ISI COMPUTER APPLICATIONS IN ENGINEERING EDUCATION (2007)
A methodology for estimation of the specific rock energy index using corrected down-the-hole drill monitoring data Izquierdo, Luis E.; Chiang, Luciano E. Article SCOPUS Mining Technology: IMM Transactions Section A (2004)
Dynamic force-penetration curves in rock by matching theoretical to experimental wave response Chiang, Luciano E. Article ISI Journal of Experimental Mechanics (2004)
Low cost sun-tracking photovoltaic panel Chiang, Luciano E.; Jacob, Jorge Article SCOPUS International Journal of Mechanical Engineering Education (2004)
Dynamic analysis of impact tools by using a method based on stress wave propagation and impulse-momentum principle Elías, Dante; Chiang, Luciano E. Article ISI ASME Journal of Mechanical Design (2003)
Image-to-space planning for a SCARA manipulator with a single color camera Reyes, José P.; Chiang, Luciano E. Article ISI (2003)
Low cost vision system for an educational platform in Artificial Intelligence and Robotics Martin, Juan F.; Chiang, Luciano E. Article ISI COMPUTER APPLICATIONS IN ENGINEERING EDUCATION (2002)
Non-holonomic path planning among obstacles subject to curvature restrictions Esquivel, W.; Chiang, Luciano E. Article ISI (2002)
Modeling impact in DTH rock drilling Chiang, Luciano E.; Elías, Dante Article ISI INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2000)
Stepping motor driving by controlled energy discharge Vadell, Jaime; Chiang, Luciano E. Article ISI IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (1999)
Design optimization of valveless DTH pneumatic hammes by a weighted pseudo-gradient search method Chiang, Luciano E.; Stamm, Eugenio Article ISI ASME Journal of Mechanical Design (1998)

Luciano Chiang

Profesor

Ingeniería Mecánica y Metalúrgica

Pontificia Universidad Catolica de Chile

Santiago, Chile

Luciano Chiang

Líneas de Investigación

Educación

Ingeniería Mecánica, STANFORD UNIVERSITY. Estados Unidos, 1989

Ingeniería Eléctrica, STANFORD UNIVERSITY. Estados Unidos, 1988

Ingeniería Mecánica, STANFORD UNIVERSITY. Chile, 1983

Experiencia Académica

Profesor Titular Full Time

Article (18)

A general architecture for electric power management of small scale NCRE converters

A design tool and fabrication guidelines for small scale cost effective horizontal axis hydrokinetic turbines

Discrete Crack Model for simulating rock comminution processes with the Discrete Element Method

Teaching Robotics with a reconfigurable 3D multibody dynamics simulator

Location and classification of moving fruits in real time with a single color camera

A 3D FEM methodology for simulating the impact in rock drilling hammers

Optimal trajectory planning for a redundant mobile manipulator with non-holonomic constraints performing push-pull tasks

Automatic dynamic modeling and simulation of underwater vehicles for virtual prototyping

A methodology for estimation of the specific rock energy index using corrected down-the-hole drill monitoring data

Dynamic force-penetration curves in rock by matching theoretical to experimental wave response

Low cost sun-tracking photovoltaic panel

Dynamic analysis of impact tools by using a method based on stress wave propagation and impulse-momentum principle

Image-to-space planning for a SCARA manipulator with a single color camera

Low cost vision system for an educational platform in Artificial Intelligence and Robotics

Non-holonomic path planning among obstacles subject to curvature restrictions

Modeling impact in DTH rock drilling

Stepping motor driving by controlled energy discharge

Design optimization of valveless DTH pneumatic hammes by a weighted pseudo-gradient search method

Luciano Chiang