Man

Claudia Andrea Carrasco Carrasco

Profesor Titular

Universidad de Concepción

Concepción, Chile

Líneas de Investigación


Materiales para aplicaciones energéticas; Caracterización de materiales; reciclaje de materiales

Educación

  •  Ingeniería metalurgica, UNIVERSIDAD DE CONCEPCION. Chile, 2002
  •  ingeniero civil metalúrgico, UNIVERSIDAD DE CONCEPCION. Chile, 1995

Experiencia Académica

  •   Profesor asistente Full Time

    UNIVERSIDAD DE CONCEPCION

    Ingeniería

    Concepción, Chile

    2004 - 2010

  •   Profesor asociado Full Time

    UNIVERSIDAD DE CONCEPCION

    Ingeniería

    Concepción, Chile

    2010 - 2017

  •   Profesor titular Full Time

    Ingeniería

    Concepción, Chile

    2018 - At present

Experiencia Profesional

  •   Ingeniero Full Time

    Moly-Cop Chile

    Concepción, Chile

    1995 - 1997

Formación de Capital Humano


• Profesora guía de + 40 memorias de título de estudiantes de ingeniería civil de materiales, + 10 de ingeniería civil metalúrgica y + 5 ingenieros civiles químicos. Co-guía de memorias de título de estudiantes de física, química e ingeniería física.
• Directora de tesis de estudiantes de doctorado: 7 finalizadas, 4 en ejecución.


Difusión y Transferencia


Participación en programa exploradores: El potencial del hidrógeno verde en Chile
https://www.youtube.com/watch?v=Hwgd7QfH_Sc

Participación programa derecho al futuro: Economía circular
https://www.tvu.cl/programas/derecho-al-futuro/2019/12/16/economia-circular-y-su-impacto-en-el-desarrollo-regional.html

Reportaje Diario Concepción: Patente de invención material para electrodos en electrólisis ácida
https://www.diarioconcepcion.cl/economia/2020/09/20/udec-cerca-de-produccion-de-hidrogeno-verde.html

Participación Misión Cavendish, Tour 2021 – Club de Innovación
https://clubdeinnovacion.com/cavendishtour-recursos/ (cuarta jornada)

Ciclo de seminarios Pemer: “Nuevos mercados, el hidrógeno y nuevas tecnologías II”
https://ingenieria.uchile.cl/noticias/173024/pemer-exitoso-ciclo-de-seminarios-sobre-transformacion-energet


Premios y Distinciones

  •   Reconocimiento Impacto de Publicaciones

    UNIVERSIDAD DE CONCEPCION

    Chile, 2021

    Publicación mayor índice de impacto en el período


 

Article (85)

Operational variable effect on the COD removal efficiency using electrocoagulation in landfill leachate treatment
Superficial Grain Refinement of 316L Stainless Steel by Rolling with Rough Rolls
The effect of sintering temperature on the properties of the BiOCl films for potential application in DSSC
Use of copper sheet in a solar photo-Fenton-like process applied in the treatment of landfill leachate
Critical aspects in the development of anodes for use in seawater electrolysis
Evaluation of flow accelerated corrosion and mechanical performance of martensitic steel T91 for a ternary mixture of molten salts for CSP plants
Extreme arid conditions: Association among soiling characteristics, transmittance loss and climatic conditions
Heating Pre-Treatment of Copper Ores and Its Effects on the Bond Work Index
Corrosion evaluation by electrochemical real-time tracking of VM12 martensitic steel in a ternary molten salt mixture with lithium nitrates for CSP plants
Low-cost Pb-Co-Sn film for the oxygen evolution reaction in acid media
Synthesis and characterization of nanostructured Pb-Co-Sn film for the oxygen evolution reaction in sulfuric acid media
Effect of supporting electrolyte concentration on one-step electrodeposited CuInS2 films for ZnS/CuInS2 solar cell applications
Study of anticorrosive coatings based on high and low molecular weight polyphenols extracted from the Pine radiata bark
Synthesis and structural analysis of electrodeposited Pb-Co films for oxygen evolution applications
Application of electrocoagulation for the efficient pollutants removal to reuse the treated wastewater in the dyeing process of the textile industry
Application of electrocoagulation for the efficient pollutants removal to reuse the treated wastewater in the dyeing process of the textile industry
Study of anticorrosive coatings based on high and low molecular weight polyphenols extracted from the Pine radiata bark
Synthesis and structural analysis of electrodeposited Pb-Co films for oxygen evolution applications
Study of the early growth stages of chemically deposited ZnS thin films from a non-toxic solution
Lead-Based Anodes for Copper Electrowinning: Effect of Grain Size on Mechanical and Anticorrosion Properties
Lead-Based Anodes for Copper Electrowinning=> Effect of Grain Size on Mechanical and Anticorrosion Properties
Study of the early growth stages of chemically deposited ZnS thin films from a non-toxic solution
Effect of different complexing agents on Pb–Co thin-film electrodeposition
Electrodeposition of Lead-Cobalt Anodes: The Effect of Electrolyte pH on Film Properties
Energy Efficiency Monitoring in a Coal Boiler Based on Optical Variables and Artificial Intelligence
Optimal deformation hardening in lead base anodes for copper electrowinning for an appropiate working life
Comprehensive study of growth mechanism and properties of low Zn content Cd1-xZnxS thin films by chemical bath
Radiation measurement based on spectral emissions in industrial flames
Radiation measurement based on spectral emissions in industrial flames
Proposed heat treatment conditions to improve toughness of steel grinding balls
Proposed heat treatment conditions to improve toughness of steel grinding balls
Quenching simulation of steel grinding balls
Quenching simulation of steel quenching grinding balls
Synthesis, characterization and optical properties of ATiO(3)-Pr thin films prepared by a photochemical method (where A = Ba and Ca)
Synthesis, characterization and optical properties of ATiO3-Pr thin films prepared by a photochemical method (where A = Ba and Ca)
Characterization of ZnS thin films synthesized through a non-toxic precursors chemical bath
Characterization of ZnS thin films Synthesized through a non-toxic precursors chemical bath
Horse chestnut (Aesculus hippocastanum L.) starch: Basic physico-chemical characteristics and use as thermoplastic material
Horse chestnut (Aesculus Hippocastanum L.) starch=> basic physico-chemical characteristics and use as thermoplastic material
Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage can
Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage cans
Photochemical synthesis of AZrO(3-x) thin films (A=Ba, Ca and Sr) and their characterization
Photochemical synthesis of AZrO3␣X thin films (A1⁄4Ba, Ca and Sr) and their characterization
Rolling of 316L Stainless Steel with Rough Rolls to Potentially Obtain Superficial Nanograins
Rolling of 316L stainless steel with rough rolls to potentially obtain superficial nanograins
Preparation of poly(vinyl chloride)/ copper nanocomposite films with reduced bacterial adhesion
Preparation of poly(vinyl chloride)/copper nanocomposite films with reduced bacterial adhesion
Efecto de la modificación superficial de alambres delgados de acero inoxidable AISI 302 mediante plasma electrolítico sobre sus propiedades mecánicas
Effects of surface modification of thin wires of AISI 302 stainless steel by electrolytic plasma on its mechanical properties
Impurities on cathodic copper=> Effect on the ductility of copper wires
Influence of Impurities in Cathodic Copper on the Ductility of Copper Wires
Influence of Impurities in Cathodic Copper on the Ductility of Copper Wires
Physical, chemical and mechanical properties of pehuen cellulosic husk and its pehuen-starch based composites
Physical, chemical and mechanical properties of pehuen cellulosic husk and its pehuen-starch based composites
Precipitation in a lead calcium tin anode
Precipitation in a lead calcium tin anode
Processing and characterization of starch-based materials from pehuen seeds (Araucaria araucana (Mol) K. Koch)
Processing and characterization of starch-based materials from pehuen seeds (Araucaria araucana (Mol) K. Koch).
Study of major variables for the establishment of electrolytic plasma at low power
Effect of processing parameters on the evolution of dislocation density and sub-grain size of a 12%Cr heat resistant steel during creep at 650 degrees C
Effect of processing parameters on the evolution of dislocation densityand sub-grain size of a 12%Cr heat resistant steel during creep at 650°C
Microstructural and mechanical properties of an Al-based MMC reinforced with Al2O3 particles produced by semisolid solidification
Microstructure investigations and mechanical properties of an Al-Al 2O 3 MMC produced by semi-solid solidification
Microstructure investigations and mechanical properties of an Al-Al2O3 MMC produced by semi-solid solidification
Design and characterization of microstructure evolution during creep of 12% Cr heat resistant steels
Design and characterization of microstructure evolution during creep of 12% Cr heat resistant steels
Investigations on coarsening of MX and M 23C 6 precipitates in 12% Cr creep resistant steels assisted by computational thermodynamics
Investigations on Coarsening of MX and M23C6 Precipitates in 12% Cr Creep Resistant Steels Assisted by Computational Thermodynamics
Investigations on coarsening of MX and M23C6 precipitates in 12% Cr creep resistant steels assisted by computational thermodynamics
Investigations on the growth kinetics of Laves phase precipitates in 12% Cr creep-resistant steels: Experimental and DICTRA calculations
Investigations on the growth kinetics of Laves phase precipitates in 12% Cr creep-resistant steels=> Experimental and DICTRA calculations
Study of precipitation hardening in lead calcium tin anodes for copper electrowinning
Study of the precipitation hardening in lead calcium tin anodes for copper electrowinning
Survival of Splinted Mini-Implants After Contamination with Stainless Steel
Survival of splinted mini-implants after contamination with stainless steel
Residual stress during heat treatment of steel grinding balls
Stability of Cu-Li alloy in the rank of 298 to 673 K
Stability of Cu-Li alloy in the rank of 298 to 673 K Estabilidad de la aleación Cu - 2,5% Li en el rango 298 a 673 K
Titanium nitride coatings on copper alloy prepared by dc reactive magnetron sputtering
Effect of nitrogen content on the microstructure and mechanical properties of CNx thin films
Hot consolidation of Cu-Li powder alloys: a first approach to characterization
Influence of the impurities on cathodic copper on the ductility of copper wires
Obtention of an Al-based composite material by direct fusion of used beverage cans
Optimal Precipitation Hardening Conditions in Lead Base Anodes for Copper Electrowinning
Residual stresses during heat treatment of steel grinding balls

ConferencePaper (8)

On the use of flame analysis and optical variables for an optimized operation in ladle furnace preheating process
Influence of the impurities on cathodic copper on the ductility of copper wires
Obtention of an Al-based composite material by direct fusion of used beverage cans
Optimal precipitation hardening conditions in lead base anodes for copper electrowinning
Thermal diffusivity of Al-Mg based metallic matrix composite reinforced with Al 2O 3 ceramic particles
Development of low carbon boron steel for wire drawing
Temperature distribution, phase transformations and residual stresses in heat treatment of grinding balls
Hot consolidation of Cu-Li powders alloys: A first approach to characterization

Proyecto (12)

SERC - Solar Energy Research Center
AtaMoS-Tec
"New energy sources=> Development of electrocatalytic anodes for acid water electrolysis"
CREAT-e Network
Development of lead based anodes for copper electrowinning with improved mechanical and anticorrosion properties
Improve of the Working Life of Steel Grinding Balls by Optimizing their Hardness and their Tenacity
Secondary Aluminum Production=> A Novel Process to Produce Aluminum Metal Matrix Composite by Direct Melting of Used Beverage Cans
NanoCom Network
Impurities on Cathodic Copper=> Study of their Influence on the Ductility of Copper Wires and Development of Mechanical Tests Sensible to such Impurities
Lead base anodes for copper electrowinning. Optimal precipitation hardening conditions for its appropriate working life
Increasing the working life of grinding balls by means of a diminution residual stresses induced during heat treatment
Obtaining and characterization of metal matrix composite materials produced by semisolid casting
65
Claudia Carrasco

Profesor Titular

Ingeniería de materiales

Universidad de Concepción

Concepción, Chile

11
Orlando Prat

UNIVERSIDAD DE CONCEPCIÓN

Concepción, Chile

8
CARLOS RODRIGUEZ

Académico Investigador

Instituto de Investigación Multidisciplinario en Ciencia y tecnología

UNIVERSIDAD DE LA SERENA

La Serena, Chile

5
David Rojas

Docente

Materiales

Universidad de Cocnepcion

Concepción, Chile

3
Marcos Flores

profesor asociado

departamento de física

UChile

santiago, Chile

3
Gerardo Cabello

Academico

Departamento de Ciencias Básicas

Universidad del Bio-Bio, Chile

Chillán, Chile

3
Alejandro ROJAS

Associate Professor

Ingeniería Eléctrica

Universidad de Concepción

Concepción, Chile

3
Gerardo Cabello

Académico

Ciencias Básicas

UNIVERSIDAD DEL BIO-BIO

Chillán, Chile

3
Johanna Castaño

Docente Investigador

Ingeniería Civil

Universidad San Sebastian

Concepción, Chile

2
Hugo Garcés

ACADEMICO

INGENIERIA INFORMATICA

UNIVERSIDAD CATOLICA DE LA SANTISIMA CONCEPCION

Concepción, Chile

2
Patricia Diaz

Academic

University of Connecticut Health Center

Farmington, CT, Estados Unidos

2
Claudia Caro

UNIVERSIDAD DEL BÍO-BÍO

Chillán, Chile

2
Myrna Sandoval

Profesor Asociado

Física

UNIVERSIDAD DE CONCEPCION

CONCEPCION, Chile

2
Luis Arias

Associate Professor

Electrical Engineering

University of Concepción

Concepción, Chile

2
Carlos Wörner

jubilado

Pontificia Universidad Católica de Valparaíso

Valparaíso, Chile

2
MANGALARAJA Ramalinga Viswanathan

Profesor Titular

Departamento de Ingeniería de Materiales

UNIVERSITY OF CONCEPCION

Concepcion, Chile

2
Cristobal Montalba

Docente/Investigador

Tecnologías Industriales

Universidad de Talca

Curicó, Chile

2
Hugo Garces

Profesor Asistente

Ingenieria Informatica

UNIVERSIDAD CATOLICA DE LA SANTISIMA CONCEPCION

concepcion, Chile

1
Oscar Farías

Profesor Asociado

Ingeniería Mecánica

Universidad de Concepción

Concepción, Chile

1
Hector Pesenti

Academico

de Obras Civiles y Geología

Universidad Catolica de Temuco

Temuco, Chile

1
Marisol Maril

Estudiante

Departamento de Ingeniería de Materiales

Universidad de Concepción

CONCEPCION, Chile

1
Pablo Tobosque

ESTUDIANTE

INGENIERIA DE MATERIALES

Universidad de Concepción

CONCEPCION, Chile

1
Ljubisa Radovic

Professor

Chemical Engineering

UNIVERSIDAD DE CONCEPCION

Concepcion, Chile

1
Ricardo Salazar

PROFESOR ASOCIADO

QUÍMICA INORGÁNICA

Pontificia Universidad Católica de Chile

SANTIAGO, Chile

1
Yosselin Huentupil

Colaborador Académico

Universidad de Concepción

Concepción, Chile

1
Jorge Jofré

Director

Centro de Rehabilitación Oral Avanzada e Implantología

UNIVERSIDAD DE CONCEPCIÓN

Concepción, Chile

1
Claudia Bernal

Academica

Departamento de Química

Universidad de La Serena

La Serena, Chile