PDI - Resultado de Búsqueda

Juan Carlos Pina

Profesor Asistente

Universidad de Santiago de Chile

Santiago, Chile

*Computational mechanics of solids & structures: mechanical & thermo-mechanical response of materials w/ complex microstructures, multiscale mechanics, plasticity and viscoplasticity. *Mechanics of timber & CLT: micro-mechanics, creep & buckling.

Computational mechanics of solids and structures, EINDHOVEN UNIVERSITY OF TECHNOLOGY. Holanda, 2015
Computational mechanics of solids and structures , UNIVERSITY OF WALES SWANSEA. Reino Unido, 2008
Ingeniero Civil, UNIVERSIDAD NACIONAL DE CUYO. Argentina, 2005

Assistant Professor Full Time

UNIVERSIDAD DE SANTIAGO DE CHILE

Facultad de Ingeniería

Santiago, Chile

2016 - A la fecha

Ingenierio Estructural Full Time

Camps y Asociados

Mendoza, Argentina

2004 - 2005
Ingeniero Estructural Full Time

Industrias Metallúrgicas Pescarmona S.A.

Mendoza, Argentina

2005 - 2007
Mechanical/Structural Engineering Full Time

ASML

Eindhoven, Holanda

2013 - A la fecha


Influence on Physical and Mechanical Properties of Concrete Using Crushed Hazelnut Shell Cartagena, Nicole Galvez; Araya, Grissel Munoz; Yanez, Sergio J.; Sepulveda, Sandra Gonzalez; Pina, Juan Carlos Article ISI APPLIED SCIENCES-BASEL (2023)
Investigation of the Influence of Design Parameters on the Strength of Steel-Concrete Composite Shear Walls by Finite Element Simulations Javadi, Masoud; Saavedra Flores, Erick I.; Yanez, Sergio J.; Avudaiappan, Siva; Pina, Juan C.; Guzman, Carlos F. Article ISI BUILDINGS (2023)
Numerical study of the thermo-mechanical behavior of steel-timber structures exposed to fire Dellepiani, Matias Godoy; Munoz, Guillermo Roa; Yanez, Sergio J.; Guzman, Carlos Felipe; Flores, Erick I. Saavedra; Pina, Juan Carlos Article ISI JOURNAL OF BUILDING ENGINEERING (2023)
Experimental study on the short-term stress relaxation response of Chilean radiata pine Carlos Pina, Juan; Felipe Guzman, Carlos; Yanez, Sergio J.; Garcia-Herrera, Claudio M.; Herrera Gonzalez, Alvaro A.; Palma Medel, Gabriel A.; Saavedra Flores, Erick, I Article ISI WOOD SCIENCE AND TECHNOLOGY (2022)
Thermo-mechanical analysis of wood through an asymptotic homogenisation approach Vega, Carlos Rojas; Pina, Juan Carlos; Bosco, Emanuela; Flores, Erick I. Saavedra; Guzman, Carlos F.; Yanez, Sergio J. Article ISI CONSTRUCTION AND BUILDING MATERIALS (2022)
Nonlinear numerical model of headed shear stud anchors for composite open web steel joists Yanez, Sergio J.; Dinehart D.W.; Pina, Juan Carlos; Guzman, Carlos Felipe Article Steel and Composite Structures, An International Journal (2021)
Simulation of Mode I Interlaminar Damage of a GFRP Composite Using Cohesive Laws in the Framework of the Equivalent LEFM R-Curve and an Optimised Algorithm Torres, Luis; Saavedra, Karin; Pincheira, Gonzalo; Pina, Juan Carlos Article ISI POLYMERS (2021)
Numerical investigation on the creep response of concrete structures by means of a multi-scale strategy Godoy Dellepiani, Matias; Rojas Vega, Carlos; Carlos Pina, Juan; Saavedra Flores, Erick, I Article ISI CONSTRUCTION AND BUILDING MATERIALS (2020)
Multiscale modeling of the thermal conductivity of wood and its application to cross-laminated timber Diaz, Ariel R.; Saavedra Flores, Erick, I; Yanez, Sergio J.; Vasco, Diego A.; Pina, Juan C.; Guzman, Carlos F. Article ISI SCOPUS INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Novel experimental method to determine the limit strain by means of thickness variation Iquilio, RA; Cerda, FMC; Monsalve, A; Guzman, CF; Yanez, SJ; Pina, JC; Vercruysse, F; Petrov, RH; Saavedra, EI Article ISI SCOPUS INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Numerical study on the elastic buckling of cross-laminated timber walls subject to compression Pina, JC; Flores, EIS; Saavedra, K Article ISI SCOPUS CONSTRUCTION AND BUILDING MATERIALS (2019)
Prediction of longitudinal shear resistance of steel-concrete composite slabs Ahmed, Saddam M.; Avudaiappan, Siva; Sheet, Ikhlas S.; Saavedra Flores, Erick I.; Pina, Juan C.; Yanez, Sergio J.; Guzman, Carlos F. Article ISI SCOPUS ENGINEERING STRUCTURES (2019)
Microstructural study of the mechanical response of compacted graphite iron: An experimental and numerical approach Pina, J. C.; Shafqat, S.; Kouznetsova, V. G.; Hoefnagels, J. P. M.; Geers, M. G. D. Article ISI MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
An Extension of the Birnbaum-Saunders Distribution as a Model for Fatigue Failure Due to Multiple Cracks Leiva, Ricardo; Roy, Anuradha; Bageta, Ruben; Pina, Juan Carlos Article ISI JOURNAL OF STATISTICAL THEORY AND PRACTICE (2015)
Microstructural model for the time-dependent thermomechanical analysis of cast irons Pina, J.C.; Kouznetsova, V.G.; van Maris, M.P.F.H.L.; Geers, M.G.D. Article GAMM-Mitteilungen (2015)
Thermo-mechanical analyses of heterogeneous materials with a strongly anisotropic phase: the case of cast iron Pina, J. C.; Kouznetsova, V. G.; Geers, M. G. D. Article ISI INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Elevated temperature creep of pearlitic steels: an experimental-numerical approach Pina, J. C.; Kouznetsova, V. G.; Geers, M. G. D. Article ISI MECHANICS OF TIME-DEPENDENT MATERIALS (2014)


FINITE ELEMENT APPROACH TO SIMULATE CNT-REINFORCED CALCIUM-SILICATE-HYDRATE (C-S-H) COMPOSITE Guzman, CF; Flores, EIS; Pina, JC; Yanez, S ConferencePaper ISI (2017)

Juan Pina

Profesor Asistente

Ingeniería en Obras Civiles

Universidad de Santiago de Chile

Santiago, Chile

Carlos Guzmán

Profesor Asistente

Ingeniería en Obras Civiles

Universidad de Santiago de Chile

Santiago, Chile

Sergio Yanez

Profesor Asistente

Ingeniería en Obras Civiles

Universidad de Santiago de Chile

Santiago, Chile

Erick Saavedra

Académico jornada completa en el Departamento de Ingenieria Civil en Obras Civiles.

Universidad de Santiago de Chile

Santiago, Chile

SIVA AVUDAIAPPAN

Adjunct Professor

Civil Engineering

Universidad de la Santiago de Chile

Santiago, Chile

Karin Saavedra

Profesor Asistente

Departamento de Tecnologías Industriales

Universidad de Talca

Curicó, Chile

Felipe Castro

Académico

Metalurgia

Universidad de Santiago de Chile

Santiago, Chile

Diego Vasco

Profesor asociado

Departamento de Ingeniería Mecánica

Universidad de Santiago de Chile

Santiago, Chile

Juan Carlos Pina

Líneas de Investigación

Educación

Computational mechanics of solids and structures, EINDHOVEN UNIVERSITY OF TECHNOLOGY. Holanda, 2015

Computational mechanics of solids and structures , UNIVERSITY OF WALES SWANSEA. Reino Unido, 2008

Ingeniero Civil, UNIVERSIDAD NACIONAL DE CUYO. Argentina, 2005

Experiencia Académica

Assistant Professor Full Time

Experiencia Profesional

Ingenierio Estructural Full Time

Ingeniero Estructural Full Time

Mechanical/Structural Engineering Full Time

Article (17)

Influence on Physical and Mechanical Properties of Concrete Using Crushed Hazelnut Shell

Investigation of the Influence of Design Parameters on the Strength of Steel-Concrete Composite Shear Walls by Finite Element Simulations

Numerical study of the thermo-mechanical behavior of steel-timber structures exposed to fire

Experimental study on the short-term stress relaxation response of Chilean radiata pine

Thermo-mechanical analysis of wood through an asymptotic homogenisation approach

Nonlinear numerical model of headed shear stud anchors for composite open web steel joists

Simulation of Mode I Interlaminar Damage of a GFRP Composite Using Cohesive Laws in the Framework of the Equivalent LEFM R-Curve and an Optimised Algorithm

Numerical investigation on the creep response of concrete structures by means of a multi-scale strategy

Multiscale modeling of the thermal conductivity of wood and its application to cross-laminated timber

Novel experimental method to determine the limit strain by means of thickness variation

Numerical study on the elastic buckling of cross-laminated timber walls subject to compression

Prediction of longitudinal shear resistance of steel-concrete composite slabs

Microstructural study of the mechanical response of compacted graphite iron: An experimental and numerical approach

An Extension of the Birnbaum-Saunders Distribution as a Model for Fatigue Failure Due to Multiple Cracks

Microstructural model for the time-dependent thermomechanical analysis of cast irons

Thermo-mechanical analyses of heterogeneous materials with a strongly anisotropic phase: the case of cast iron

Elevated temperature creep of pearlitic steels: an experimental-numerical approach

ConferencePaper (1)

FINITE ELEMENT APPROACH TO SIMULATE CNT-REINFORCED CALCIUM-SILICATE-HYDRATE (C-S-H) COMPOSITE

Juan Pina

Carlos Guzmán

Sergio Yanez

Erick Saavedra

SIVA AVUDAIAPPAN

Karin Saavedra

Felipe Castro

Diego Vasco