Cv-diego-vasco.jpg_thumb90

Diego Andrés Vasco Calle

Profesor asociado

Universidad de Santiago de Chile

Santiago, Chile

Líneas de Investigación


Caracterización térmica de materiales, Materiales de cambio de fase, Fluidodinámica computacional (CFD), Aplicaciones con nanofluidos, Almacenamiento térmico

Educación

  •  Ingeniería de Procesos, UNIVERSIDAD DE SANTIAGO DE CHILE. Chile, 2013
  •  Ciencias Químicas, Universidad de Antioquia. Colombia, 2008
  •  Ingeniero Químico, Universidad Nacional de Colombia. Colombia, 2004

Experiencia Académica

  •   Académico Full Time

    UNIVERSIDAD DE SANTIAGO DE CHILE

    Ingeniería

    Santiago de Chile, Chile

    2013 - A la fecha

Experiencia Profesional

  •   Instructor Part Time

    Universidad de Antioquia

    Colombia

    2005 - 2007

  •   Académico Full Time

    Universidad de Santiago de Chile

    Chile

    2013 - A la fecha

Premios y Distinciones

  •   Beca estudiante instructor

    UNIVERSIDAD DE ANTIOQUIA

    Colombia, 2005

    Beca de matrícula y mantención como estudiante del magíster en Ciencias Químicas

  •   Beca Doctorado Latinoamericano

    UNIVERSIDAD DE SANTIAGO DE CHILE

    Chile, 2008

    Beca de Doctorado para estudiantes latinoamericanos

  •   Beca AUGM-COIMBRA

    KARL-FRANZES UNIVERSITAET GRAZ

    Austria, 2011

    Semestre de intercambio a nivel de postgrado

  •   Beca Santander jóvenes profesores e investigadores

    PONTIFICIA UNIVERSIDAD BOLIVARIANA

    Colombia, 2015

    Estadía de Investigación

  •   Programa escala docente AUGM

    UNIVERSIDADE FEDERAL DO RIO DE JANEIRO

    Brasil, 2019

    Movilidad académica

  •   Beca fundación Carolina

    UNIVERSITAT ROVIRA I VIRGILI

    España, 2022

    Postdoc de corta duración

  •   Premio Ícono Investigador con proyección

    UNIVERSIDAD DE SANTIAGO DE CHILE

    Chile, 2023

    Los “Premios Icono 2023” se instauran a partir de hoy con el objetivo de reconocer a aquellos y aquellas personas del ecosistema de la FING que han potenciado de alguna u otra manera la comunidad interna y externa gracias a sus capacidades, conocimientos y aporte en el desarrollo de iniciativas que implican la I+D+i+e como su motor principal. En la premiación se retribuirá en las categorías internas a: Investigador/a Destacado/a con Trayectoria, Investigador/a Destacado/a con Proyección, Emprendedor/a Destacado/a, Académico/a Destacado/a en Internacionalización, Docente Innovador/a y Mujer que Impulsa el Cambio. También, se reconocerá las categorías externas de: Facilitador/a, Asesor/a o Mentor/a (Red FAM) destacado y Empresa destacada.


 

Article (54)

An improved ventilation system for settling stage of a wastewater treatment plant: a computational simulation analysis
Cost-benefit analysis of solar energy integration in buildings: a case study of affordable housing in Brazil
Effect of the temperature and grain direction on the stress relaxation behavior of PCM-impregnated and nonimpregnated wood under tensile and bending stresses
Experimental study of the heat transfer during the ice formation of TiO2 water-nanofluid around a helical coil CTES system
Experimental study of the unconstrained melting of a phase change material for air-conditioning applications
Geomorphological changes in young soils with sparse vegetation: Mathematical modeling and numerical simulation
Impact Assessment of Implementing Several Retrofitting Strategies on the Air-Conditioning Energy Demand of an Existing University Office Building in Santiago, Chile
Key Practices for Incorporating Sustainability in Project Management from the Perspective of Brazilian Professionals
Numerical prediction of the solidification and melting of encapsulated nano-enhanced phase change materials
Optimized thermal envelope of low-income dwellings in Santiago de Chile incorporating Pinus radiata wood impregnated with phase change materials
Agar Biopolymer Films for Biodegradable Packaging: A Reference Dataset for Exploring the Limits of Mechanical Performance
Ionanofluids based on ionic liquid mixtures, a new approach as an alternative material for solar energy storage
Numerical simulation of the melting and solidification processes of two organic phase change materials in spherical enclosures for cold thermal energy storage applications
Simulation of cooling in a magma chamber: Implications for geothermal fields of southern Peru
The Effect of Ag-Decoration on rGO/Water Nanofluid Thermal Conductivity and Viscosity
Thermal and Rheological Characterization of Aqueous Nanofluids Based on Reduced Graphene Oxide (rGO) with Manganese Dioxide Nanocomposites (MnO<sub>2</sub>)
Characterization of mechanical performance of Pinus radiata wood impregnated with octadecane as phase change material
Framework for Assessing Urban Energy Sustainability
Methodology to reduce cooling energy consumption by incorporating PCM envelopes: A case study of a dwelling in Chile
Thermal characterization and stability analysis of aqueous ZnO-based nanofluids numerically implemented in microchannel heat sinks
Experimental and computational study of the implementation of mPCM-Modified gypsum boards in a test enclosure
Experimental investigation of viscosity, enhanced thermal conductivity and zeta potential of a TiO2 electrolyte - based nanofluid
Thermal and Mechanical Analysis of Plywood Boards Thermally Enhanced with Phase Change Materials
Thermal Characterization of Pinus radiata Wood Vacuum-Impregnated with Octadecane
About the relevance of particle shape and graphene oxide on the behavior of direct absorption solar collectors using metal based nanofluids under different radiation intensities
Effect of starch nanoparticles on the crystallization kinetics and photodegradation of high density polyethylene
Feasibility study of the application of a cooling energy storage system in a chiller plant of an office building located in Santiago, Chile
INTEGRATING ENVIRONMENTAL PHENOMENA IN THE INITIAL ARCHITECTURE STUDIO: REFLECTIONS ON MODELING OF CONVECTIVE CURRENTS IN LIVING SPACES
Multiscale modeling of the thermal conductivity of wood and its application to cross-laminated timber
Numerical study of TiO2-based nanofluids flow in microchannel heat sinks: Effect of the Reynolds number and the microchannel height
Assessment of an integrated household refrigerator with an eutectic phase change material and a solar photovoltaic system
Determinación inversa de la conductividad térmica en madera de Pinus radiata
Effect of temperature and CuO-nanoparticle concentration on the thermal conductivity and viscosity of an organic phase-change material
Effect of the insulation level on the thermal response of a PCM-modified envelope of a dwelling in Chile
Evaluation of an integrated household refrigerator evaporator with two eutectic phase-change materials
Kinematic characterization of the pressure-dependent PCM impregnation process for radiata pine wood samples
Modelling of Radio-frequency Heating of Piles of Pinus radiata Wood
Numerical heat transfer during Herschel-Bulkley fluid natural convection by CVFEM
Transient measurement of the thermal conductivity as a tool for the evaluation of the stability of nanofluids subjected to a pressure treatment
Warp Recovery in Radiata Pine Lumber Using Steam Treatment
Computational study of transient conjugate conductive heat transfer in light porous building walls
Mechanical characterization of the elastoplastic response of asphalt felt paper
Study of the effect of the incorporation of TiO2 nanotubes on the mechanical and photodegradation properties of polyethylenes
Thermal simulation of a social dwelling in Chile: Effect of the thermal zone and the temperature-dependant thermophysical properties of light envelope materials
Towards generating efficient flow solvers with the ExaStencils approach
Computational simulation of laminar heat convection of nanofluids in a circular tube and squared duct [Simulación computacional de convección de calor laminar de nanofluidos en tubo circular y ducto cuadrado]
Power law non-Newtonian fluid unsteady conjugate three-dimensional natural convection inside a vessel driven by surrounding air thermal convection in a cavity
Numerical simulation of conjugate forced turbulent heat convection with induced natural laminar convection in a 2D inner cavity
PARALLEL FINITE VOLUME METHOD SIMULATION OF THREE-DIMENSIONAL FLUID FLOW AND CONVECTIVE HEAT TRANSFER FOR VISCOPLASTIC NON-NEWTONIAN FLUIDS
Two-dimensional non-Newtonian injection molding with a new control volume FEM/volume of fluid method
Unsteady conjugate mixed convection phase change of a power law non-Newtonian fluid in a square cavity
Electrokinetic study of the buffer capacity of some soils from Tenerife.
Migration Effect of Ba2+ in the Extraction of a Larger Cation (K+) Naturally Present in Volcanic Soil
Effect of time and electrical potential gradient on the buffer capacity of soils, as measured using an electrokinetic method

ConferencePaper (1)

Electrorepulsion in nanofluids: Experimental characterization for a stable behavior

Proyecto (11)

Preparación y caracterización térmica de nanofluidos para aplicaciones tecnológicas a microescala
Implementation of Enhanced Latent Heat Storage Building Materials in Heating and Cooling of Buildings in Chile
Estudio de la aplicación de altas presiones en la estabilidad y propiedades termofísicas de nanofluidos
Disminución de carga térmica en recintos de uso académico mediante ventilación natural=> Uso potencial en el campus de la Universidad de Santiago
Tecnología del secado y tratamiento térmico de la madera
Estudio Computacional y Experimental de Materiales Constructivos Usados en Envolventes Térmicas en Chile
EXPERIMENTAL AND COMPUTATIONAL STUDY OF THERMAL ENVELOPES WITH NANOPARTICLE BASED ORGANIC PHASE CHANGE MATERIALS
CONJUGATE MIXED CONVECTION / LIQUID-SOLID PHASE CHANGE NATURAL CONVECTION APPLIED TO NON NEWTONIAN LIQUIDS IN FOOD FREEZING, POLYMER MOLDING, PURE AND BINARY ALLOY MOULD SOLIDIFICATION
THEORICAL, COMPUTATIONAL AND EXPERIMENTAL STUDY OF FLUID DYNAMICS, HEAT AND MASS TRANSFER IN SOLID-LIQUID PHASE CHANGE PROBLEMS OF NON NEWTONIAN FLUIDS
Electrokinetic characterization of andic soils of agricultural interest
Implementation of a electrokinetic technique for characterization of volcanic soils
54
Diego Vasco

Profesor asociado

Departamento de Ingeniería Mecánica

Universidad de Santiago de Chile

Santiago, Chile

6
Claudio Garcia

Associate Professor

Departamento de Ingenieria Mecanica

UNIVERSIDAD DE SANTIAGO DE CHILE

Santiago, Chile

4
NELSON MORAGA

TITULAR PROFESSOR

MECHANICAL ENGINEERING

UNIVERSIDAD DE LA SERENA

LA SERENA, Chile

3
Daming Chen

Profesor media jornada

Ingeniería Mecánica

Universidad de Santiago de Chile

Santiago, Chile

2
Roberto Ortega

Académico Jornada Completa

Universidad de Santiago de Chile

Santiago, Chile

2
DINESH SINGH

ASSOCIATE PROFESSOR

PHYSICS

UNIVERSIDAD DE SANTIAGO DE CHILE, SANTIAGO

Santiago, Chile

2
Paula Zapata

Profesora Asociada

Ciencias del ambiente

Universidad Santiago de Chile

Santiago, Chile

2
francisco sepúlveda

Profesor Jornada Completa

Mecánica

USACH

santiago, Chile

1
Sergio Yanez

Profesor Asistente

Ingeniería en Obras Civiles

Universidad de Santiago de Chile

Santiago, Chile

1
LINETTE SALVO

ASSOCIATE RESEARCHER

INGENIERIA EN MADERAS

UNIVERSIDAD DEL BIOBIO

CONCEPCION, Chile

1
Carlos Guzmán

Profesor Asistente

Ingeniería en Obras Civiles

Universidad de Santiago de Chile

Santiago, Chile

1
Juan Pina

Profesor Asistente

Ingeniería en Obras Civiles

Universidad de Santiago de Chile

Santiago, Chile

1
Roberto Lemus

Assistant Professor

Food Science and Chemical Technology

Universidad de Chile

Santiago, Chile

1
Fabien Rouault

Profesor Asistente

PONTIFICIA UNIVERSIDAD CATOLICA DE CHILE

Santiago, Chile

1
Sichem Guerrero

Professor

Faculty of Engineering and Applied Sciences

UNIVERSIDAD DE LOS ANDES

Santiago, Chile

1
Julio Urzúa

Director

Center for Materials for Energy Transition and Sustainability

Chilean Nuclear Energy Commission

Santiago, Chile

1
María José Inestrosa

Investigador

Centro de Materiales para la Transición y Sostenibilidad Energética

COMISION CHILENA DE ENERGIA NUCLEAR

Santiago, Chile

1
Carlos Salinas

Associate Profesor

Department of Mechanical Engineering

UNIVERSIDAD DEL BIO-BÍO

Concepción, Chile

1
Johan González

Conferenciante

Tecnologias Industriales

Universidad de Talca

Curicó, Chile