Man

Rino Morent

Full professor

University of Ghent

Gent, Bélgica

Líneas de Investigación


Plasma penetration into porous materials for biomedical, textile and filtration applications. Surface engineering, Physics of (fusion) plasmas and electric discharges, Applied and interdisciplinary physics.

Educación

  •  Engineering Physics, UNIVERSITY OF GENT. Bélgica, 2004
  •  Experimental Physics, UNIVERSITY OF GENT. Bélgica, 2000
  •  Physics, UNIVERSITY OF GENT. Bélgica, 2000

Experiencia Académica

  •   Asistente Junior Full Time

    UNIVERSITY OF GENT

    Física

    Ghent, Bélgica

    2000 - 2004

  •   Asistente Postdoctorado Full Time

    UNIVERSITY OF GENT

    Física

    Ghent, Bélgica

    2004 - 2010

  •   Investigador Postdoctorado Full Time

    UNIVERSITY OF GENT

    Física

    Ghent, Bélgica

    2010 - 2012

  •   Profesor asociado Full Time

    UNIVERSITY OF GENT

    Física

    Ghent, Bélgica

    2012 - A la fecha

Experiencia Profesional

  •   Asistente Junior Full Time

    Universidad de Ghent (UGent)

    Ghent, Bélgica

    2000 - 2004

  •   Asistente Postdoctorado Full Time

    Universidad de Ghent (UGent)

    Ghent, Bélgica

    2004 - 2010

  •   Investigador PostDoctorado Full Time

    Universidad de Ghent (UGent)

    Ghent, Chile

    2010 - 2012

  •   Profesor Asociado Full Time

    Universidad de Ghent (UGent)

    Ghent, Chile

    2012 - A la fecha

Formación de Capital Humano


Supervisor de 14 tesis doctorales:

• Rezaei, Fatemeh. “Modification of Polymer Solutions by Electrical Discharges Generated Inside the Liquid Phase.” 2019 : n. pag. Print.
• Ghobeira, Rouba. “Plasma Activation of Electrospun Scaffolds for Neural Tissue Engineering.” 2019 : n. pag. Print.
• Bitar, Rim. “Atmospheric Pressure Plasma-assisted Patterning of Polymer Films Using a Localized Microplasma.” 2019 : n. pag. Print.
• Philips, Charlot. “Development of Nerve Substitutes for Peripheral Nerve Regeneration.” 2019 : n. pag. Print.
• Chang, Tian. Post Plasma Catalytic Removal of Volatile Organic Compounds over Manganese-Based Catalysts. 2019.
• Onyshchenko, Yuliia. “Atmospheric Pressure Plasma Jet for Multipurpose Plasma Activation of Polymeric Substrates.” 2018 : n. pag. Print.
• Ye, Zhiping. “Plasma-catalytic Processes with Copper Manganese Oxide Catalysts for the Abatement of Volatile Organic Compounds.” 2018 : n. pag. Print.
• Sultana, Sharmin. Abatement of Chlorinated Volatile Organic Compounds from Waste Gas Streams by Post Plasma Catalysis. Ghent University. Faculty of Engineering and Architecture, 2018.
• Van Vrekhem, Stijn. Improving the Adhesion of a Shoulder Implant Using Non-Thermal Plasma Technology. 2018.
• Onyshchenko, Iuliia. “Atmospheric Pressure Plasma Jet for Multipurpose Plasma Activation of Polymeric Substrates.” 2017 : n. pag. Print.
• Cools, Pieter. “Plasma Penetration in 3D Scaffolds for Tissue Engineering Purposes.” 2017 : n. pag. Print.
• Aziz, Gaelle. “Plasma Surface Modification of Ultra-high Molecular Weight Polyethylene for Tissue Engineering Purposes.” 2017 : n. pag. Print.
• Vandenbroucke, Arne. “Abatement of Volatile Organic Compounds by Combined Use of Non-thermal Plasma and Heterogeneous Catalysis.” 2015 : n. pag. Print.
• Jacobs, Tinneke. “Plasmabehandeling Bij Subatmosferische Druk Van Vlakke En Poreuze Biodegradeerbare Polymeren.” 2012 : n. pag. Print.


Difusión y Transferencia


Sus proyectos de transferencia se concentran en la transferencia interdisciplinaria a soluciones aplicadas tecnológicas:

Development of multiplexed plasma reactor for wastewater treatment
From1 Oct 2019 ? Today
Funding: BOF - Doctoral projects (pro memore - non-attributable)

Plasma4Breathing-continuation towards technical PoC
From1 Sep 2019 ? Today
Funding: IOF - Industrial Research Fund (pro memore - non-attributable)

Combining plasma treatment and (photo)catalysis towards an energy-efficient technology for abatement of polluted air (COP-CAT)
From1 Jan 2019 ? Today
Funding: BOF - Concerted Research Project from 1994 (pro memore - non-attributable)

Fundamental physical and chemical study of the interaction between a non-thermal plasma and the surface of a porous biodegradable polyester scaffold
From1 Sep 2018 ? Today
Funding: BOF - Other initiatives (pro memore - non-attributable)

Experimental and theoretical study of the fundamental mechanisms of nitrogen fixation by plasma and plasma-catalysis: towards the development of novel, environmentally friendly and efficient processes.
From1 Jan 2018 ? Today
Funding: FWO EOS

Fundamental study of the effect of plasma penetration on cell-material interaction for scaffolds
From1 Oct 2017 ? Today
Funding: BOF - Doctoral projects (pro memore - non-attributable)

Plasma4Breathing
From1 Oct 2017 ? 28 Feb 2019
Funding: IOF - Industrial Research Fund (pro memore - non-attributable)

Plasma-assisted deposition of anisotropic multifunctional coatings on 3D porous scaffolds
From1 Oct 2017 ? Today
Funding: BOF - Doctoral projects (pro memore - non-attributable)

Innovative coupling techniques for the treatment of volatile organic compounds (VOC): new methods to improve air quality
From1 Oct 2016 ? Today
Funding: Other EU initiatives out of framework

Catalysts preparation and catalytic depollution assisted by plasma
From1 Jan 2015 ? 31 Dec 2019
Funding: FWO research project

Post-plasma catalysis for VOC removal
From1 Oct 2014 ? 30 Sep 2018
Funding: BOF - Other initiatives (pro memore - non-attributable)

Aligned plasma bio-activated nanostructured conduits for peripheral nerve regeneration.
From1 Oct 2014 ? 31 Jul 2019
Funding: BOF - Doctoral projects (pro memore - non-attributable)

Surface Modefication for Medical Implants Applications
From1 Jan 2014 ? 28 Feb 2015
Funding: BOF - Bilateral scientific cooperation (pro memore - non-attributable)

Atmospheric pressure plasma polymerization for the creation of stable COOH-rich polymeric surfaces for biomedical use
From1 Jan 2014 ? 31 Dec 2019
Funding: FWO research project

Development of amino-rich, chemically stable polymeric surfaces by atmospheric pressure plasma polymerization
From1 Jan 2013 ? 31 Dec 2018
Funding: FWO research project

Plasma catalytic abatement of chlorinated VOCs.
From1 Jan 2013 ? 31 Oct 2018
Funding: BOF - Doctoral projects (pro memore - non-attributable)

Plasma penetration into porous materials for biomedical, textile and filtration applications (PLASMAPOR)
From1 Jun 2012 ? 31 May 2017
Funding: ERC - Ideas

Fundamental study and development of plasma-treated porous titanium scaffolds for the treatment of critical bone defects
From1 Oct 2011 ? 30 Sep 2014
Funding: BOF - Other initiatives (pro memore - non-attributable), FWO fellowships


Premios y Distinciones

  •   Acknowledged among 25 most cited articles published in the journal “Surface & Coatings Technology”

    Journal “Surface & Coatings Technology”

    Holanda, 2011

    Author of 4 articles in the top 25 most cited articles published in the journal “Surface & Coatings Technology” in the period 2007-2011 (1st, 2nd, 8th and 15th place). Supervisor of several winning presentation awards of PhD students at international conferences.


 

Article (112)

A stability study of plasma polymerized acrylic acid films
Acrylic Acid Plasma Coated 3D Scaffolds for Cartilage tissue engineering applications
Acrylic acid plasma polymerization for biomedical use
Evaluation of mechanism of cold atmospheric pressure plasma assisted polymerization of acrylic acid on low density polyethylene (LDPE) film surfaces: Influence of various gaseous plasma pretreatment
Improving the surface properties of an UHMWPE shoulder implant with an atmospheric pressure plasma jet
Influence of the preparation method on the activity of copper-manganese oxides for toluene total oxidation
Plasma polymerization of cyclopropylamine with a sub-atmospheric pressure DBD
Properties, ageing behavior and stability of bipolar films containing nano-layers of allylamine and acrylic acid plasma polymers
Surface Treatment of PEOT/PBT (55/45) with a Dielectric Barrier Discharge in Air, Helium, Argon and Nitrogen at Medium Pressure
Synthesis and catalytic performances of K-OMS-2, Fe/K-OMS-2 and Fe-K-OMS-2 in post plasma-catalysis for dilute TCE abatement
The Design of MnOx Based Catalyst in Post-Plasma Catalysis Configuration for Toluene Abatement
Abatement of VOCs Using Packed Bed Non-Thermal Plasma Reactors: A Review
An in-Depth Investigation of Toluene Decomposition with a Glass Beads-Packed Bed Dielectric Barrier Discharge Reactor
Atmospheric pressure non-thermal plasma assisted polymerization of poly (ethylene glycol) methylether methacrylate (PEGMA) on low density polyethylene (LDPE) films for enhancement of biocompatibility
Atmospheric Pressure Plasma Jet Treatment of Poly-epsilon-caprolactone Polymer Solutions To Improve Electrospinning
Comparative Study of the Surface Properties and Cytocompatibility of Plasma-Treated Poly-epsilon-Caprolactone Nanofibers Subjected to Different Sterilization Methods
Effect of processing parameters on the deposition of SiOx-like coatings on the surface of polypropylene films using glow discharge plasma assisted polymerization for tissue engineering applications
Effects of different sterilization methods on the physico-chemical and bioresponsive properties of plasma-treated polycaprolactone films
Effects of pre- and post-electrospinning plasma treatments on electrospun PCL nanofibers to improve cell interactions
Functionalized, biocompatible, and impermeable nanoscale coatings for PEEK
Improvement of the plasma treatment effect on PET with a newly designed atmospheric pressure plasma jet
Influence of ethanol vapor addition on the surface modification of polyethylene in a dielectric barrier discharge
Plasma parameters effects on the properties, aging and stability behaviors of allylamine plasma coated ultra-high molecular weight polyethylene (UHMWPE) films
Titanium surface functionalization with coatings of chitosan and polyphenol-rich plant extracts
Adhesion improvement at the PMMA bone cement-titanium implant interface using methyl methacrylate atmospheric pressure plasma polymerization
Atmospheric pressure plasma activation of PP films with a localized mu plasma
Atmospheric pressure plasma deposition of antimicrobial coatings on non-woven textiles
Combination of non-thermal plasma and Pd/LaMnO3 for dilute trichloroethylene abatement
Germ-free sea bass Dicentrarchus labrax larval model: a valuable tool in the study of host-microbe interactions
Influence of non-thermal TiCl4/Ar + O-2 plasma-assisted TiOx based coatings on the surface of polypropylene (PP) films for the tailoring of surface properties and cytocompatibility
Manganese oxide octahedral molecular sieve K-OMS-2 as catalyst in post plasma-catalysis for trichloroethylene degradation in humid air
Non-thermal plasma assisted lithography for biomedical applications: an overview
Surface analysis of the selective excimer laser patterning of a thin PEDOT:PSS film on flexible polymer films
The plasma footprint of an atmospheric pressure plasma jet on a flat polymer substrate and its relation to surface treatment
Abatement of VOCs with Alternate Adsorption and Plasma-Assisted Regeneration: A Review
Antibacterial activity of nano-silver non-woven fabric prepared by atmospheric pressure plasma deposition
Antimicrobial nano-silver non-woven polyethylene terephthalate fabric via an atmospheric pressure plasma deposition process
Application of atmospheric pressure plasma on polyethylene for increased prosthesis adhesion
Atmospheric Pressure Plasma Penetration inside Flexible Polymeric Tubes
Dielectric barrier discharge plasma treatment of ultrahigh molecular weight polyethylene in different discharge atmospheres at medium pressure: A cell-biomaterial interface study
Incorporation of amine moieties onto ultra-high molecular weight polyethylene (UHMWPE) surface via plasma and UV polymerization of allylamine
Influence of DBD Inlet Geometry on the Homogeneity of Plasma-Polymerized Acrylic Acid Films: The Use of a Microplasma-Electrode Inlet Configuration
Local Analysis of Pet Surface Functionalization by an Atmospheric Pressure Plasma Jet
Modeling and Experimental Study of Trichloroethylene Abatement with a Negative Direct Current Corona Discharge
Post plasma-catalysis for total oxidation of trichloroethylene over Ce-Mn based oxides synthesized by a modified "redox-precipitation route"
Surface activation of polyethylene with an argon atmospheric pressure plasma jet: Influence of applied power and flow rate
Surface modification of polyethylene in an argon atmospheric pressure plasma jet
A combined ToF-SIMS and XPS study for the elucidation of the role of water in the performances of a Post-Plasma Process using LaMnO3+delta as catalyst in the total oxidation of trichloroethylene
Determination of the Electron Temperature of Atmospheric Pressure Argon Plasmas by Absolute Line Intensities and a Collisional Radiative Model
Engineering of Composite Organosilicon Thin Films with Embedded Silver Nanoparticles via Atmospheric Pressure Plasma Process for Antibacterial Activity
Influence of ambient conditions on the aging behavior of plasma-treated polyethylene surfaces
Influence of Water Vapor Addition on the Surface Modification of Polyethylene in an Argon Dielectric Barrier Discharge
Plasma-catalysis of low TCE concentration in air using LaMnO3+delta as catalyst
Surface Analysis of Titanium Cleaning and Activation Processes: Non-thermal Plasma Versus Other Techniques
Surface modification of an epoxy resin with polyamines and polydopamine: The effect on the initial electroless copper deposition
TCE abatement with a plasma-catalytic combined system using MnO2 as catalyst
The use of DBD plasma treatment and polymerization for the enhancement of biomedical UHMWPE
Deposition of a TMDSO-Based Film by a Non-Equilibrium Atmospheric Pressure DC Plasma Jet
Enhanced cell-material interactions on medium-pressure plasma-treated polyhydroxybutyrate/polyhydroxyvalerate
Improved cell adhesion to flat and porous plasma-treated poly-epsilon-caprolactone samples
Plasma surface modification of polylactic acid to promote interaction with fibroblasts
Nonthermal Plasma Sterilization of Living and Nonliving Surfaces
Plasma Surface Modification of Biomedical Polymers: Influence on Cell-Material Interaction
Surface modification of PTFE using an atmospheric pressure plasma jet in argon and argon + CO2
The Effect of Medium Pressure Plasma Treatment on Thin Poly-epsilon Caprolactone Layers
Effect of electrode geometry on the uniformity of plasma-polymerized methyl methacrylate coatings
Influence of operating parameters on plasma polymerization of acrylic acid in a mesh-to-plate dielectric barrier discharge
Non-thermal plasmas for non-catalytic and catalytic VOC abatement
Plasma modification of PET foils with different crystallinity
Plasma polymerisation of siloxanes at atmospheric pressure
Plasma Surface Modification of Biodegradable Polymers: A Review
Plasma treatment of polycaprolactone at medium pressure
Qualitative By-Product Identification of Plasma-Assisted TCE Abatement by Mass Spectrometry and Fourier-Transform Infrared Spectroscopy
Surface modification of polypropylene with an atmospheric pressure plasma jet sustained in argon and an argon/water vapour mixture
Visualization of the Penetration Depth of Plasma in Three-Dimensional Porous PCL Scaffolds
Chemical and physical analysis of cotton fabrics plasma-treated with a low pressure DC glow discharge
Effect of humid air exposure between successive helium plasma treatments on PET foils
Influence of Discharge Atmosphere on the Ageing Behaviour of Plasma-Treated Polylactic Acid
Plasma modification of polylactic acid in a medium pressure DBD
Stability study of polyacrylic acid films plasma-polymerized on polypropylene substrates at medium pressure
Surface modification of polymer films with a remote atmospheric pressure d.c. glow discharge: influence of substrate location
Deposition of HMDSO-based coatings on PET substrates using an atmospheric pressure dielectric barrier discharge
Deposition of Polyacrylic Acid Films by Means of an Atmospheric Pressure Dielectric Barrier Discharge
Deposition of polymethyl methacrylate on polypropylene substrates using an atmospheric pressure dielectric barrier discharge
Effect of He/CF4 DBD Operating Parameters on PET Surface Modification
Incorporation of poly(N-isopropylacrylamide)/chitosan microgel onto plasma functionalized cotton fibre surface
Nonthermal Plasma Technology as a Versatile Strategy for Polymeric Biomaterials Surface Modification: A Review
Organic-inorganic behaviour of HMDSO films plasma-polymerized at atmospheric pressure
Plasma-Polymerization of HMDSO Using an Atmospheric Pressure Dielectric Barrier Discharge
Remote Atmospheric Pressure DC Glow Discharge Treatment for Adhesion Improvement of PDMS
Comparison between XPS- and FTIR-analysis of plasma-treated polypropylene film surfaces
DBD treatment of polyethylene terephthalate: Atmospheric versus medium pressure treatment
Effects of operating parameters on plasma-induced PET surface treatment
Increasing the hydrophobicity of a PP film using a helium/CF4 DBD treatment at atmospheric pressure
Influence of ambient conditions on the ageing behaviour of plasma-treated PET surfaces
Non-thermal plasma destruction of allyl alcohol in waste gas: kinetics and modelling
Non-thermal plasma treatment of textiles
Pressure dependence of helium DBD plasma penetration into textile layers
Surface characterization of plasma-modified polyethylene by contact angle experiments and ATR-FTIR spectroscopy
Surface treatment of a polypropylene film with a nitrogen DBD at medium pressure
Adhesion enhancement by a dielectric barrier discharge of PDMS used for flexible and stretchable electronics
Study of the ageing behaviour of polymer films treated with a dielectric barrier discharge in air, helium and argon at medium pressure
Surface modification of non-woven textiles using a dielectric barrier discharge operating in air, helium and argon at medium pressure
Treatment of polymer films with a dielectric barrier discharge in air, helium and argon at medium pressure
DC-excited cold atmospheric pressure plasmas
Measuring the wicking behavior of textiles by the combination of a horizontal wicking experiment and image processing
Penetration of a dielectric barrier discharge plasma into textile structures at medium pressure
Surface modification of a polyester non-woven with a dielectric barrier discharge in air at medium pressure
Ozone generation in air by a DC-excited multi-pin-to-plane plasma source
Self-running pulsed-periodical streamer discharge in static argon sustained in a packed-bed reactor under steady-state supplying voltage
Multi-pin-to-plate atmospheric glow discharge for the removal of volatile organic compounds in waste air
X- and Q-band electron paramagnetic resonance of CO2- in hydroxyapatite single crystals
112
Rino Morent

Full professor

Applied Physics

University of Ghent

Gent, Bélgica