Man

Carlos Andres Medina Muñoz

Profesor Asistente

Universidad de Concepción

Concepcion, Chile

Líneas de Investigación


Caracterización de materiales; Materiales compuestos; Nanotecnología; Manufactura digital

Educación

  •  Licenciado en Ciencias de la Ingeniería, UNIVERSIDAD DE CONCEPCION. Chile, 2009
  •  Magíster en ciencias de la Ingeniería con mención en Ingeniería Mecánica, UNIVERSIDAD DE CONCEPCION. Chile, 2012
  •  Doctorado Ciencia e ingeniería de materiales, UNIVERSIDAD DE CONCEPCION. Chile, 2015

Experiencia Académica

  •   Profesor asociado Full Time

    UNIVERSIDAD DE CONCEPCION

    Ingeniería

    Concepción, Chile

    2016 - A la fecha

Experiencia Profesional

  •   Investigador Principal Part Time

    Universidad de Concepción

    Concepción, Chile

    2012 - 2015

  •   investigador visitante Full Time

    Imdea materiales

    Getafe, España

    2014 - 2014

  •   Profesor Asistente Full Time

    Universidad de Concepción

    Concepción, Chile

    2016 - A la fecha


 

Article (45)

Assessing Feed-Forward Backpropagation Artificial Neural Networks for Strain-Rate-Sensitive Mechanical Modeling

Forcael, Diego; Medina, Carlos

Article ISI
MATERIALS  (2024)

Polypropylene with clay-filled for fused filament fabrication: comparative study of the mechanical performance of injected and 3d printed composite

Romero, Lina M.; Esquivel, Samir E.; Montano, Mary C.; Medina-Munoz, Carlos; Sanchez-Sanhueza, Gabriela A.

Article ISI
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  (2024)

Sigma Phase Stabilization by Nb Doping in a New High-Entropy Alloy in the FeCrMnNiCu System: A Study of Phase Prediction and Nanomechanical Response

Duena, Gleydis; Medina, Carlos; Seidou, Abdul Herrim

Article ISI
METALS  (2024)

Characterization approaches affect asymmetric load predictions of hexagonal close-packed alloy



Article ISI
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T  (2023)

Characterization of Nb-Si-doped low-carbon steel treated by quenching and partitioning: Thermic treatment in two stages supported by computational thermodynamical simulation and controlled sample dimensions

Alvarado-Avil, Maria Isabel; Medina, Carlos

Article ISI
MATERIALS TODAY COMMUNICATIONS  (2023)

Design of Fe36.29Cr28.9Ni26.15Cu4.17Ti1.67V2.48C0.46 HEA using a new criterion based on VEC: Microstructural study and multiscale mechanical response



Article ISI
MATERIALS TODAY COMMUNICATIONS  (2023)

Enhancing mechanical properties of PLA and PP composites through ionic zeolite with copper nanoparticle reinforcement: microstructural and micromechanical characterization

Saez-Llanos, Thyare; Medina, Carlos

Article ISI
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  (2023)

Exploring the Impact of Cooling Rate on Microstructural Features, Mechanical Properties, and Corrosion Resistance of a Novel Nb-Stabilized Super Duplex Stainless Steel in Shielded Metal Arc Welding

Medina, Carlos

Article ISI
CRYSTALS  (2023)

Influence stacking sequence and heat treatments on the out-of-plane mechanical properties of 3D-printed fiberglass-reinforced thermoplastics

Hermosilla, Rodolfo; Castillo, Rodrigo; Escudero, Benjamin; Vargas-Silva, Gustavo; Medina, Carlos

Article ISI
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  (2023)

Production of Nb-doped super duplex stainless steel based on recycled material: A study of the microstructural characterization, corrosion, and mechanical behavior

Medina, Carlos

Article ISI
MATERIALS CHEMISTRY AND PHYSICS  (2023)

Quantifying the influence of reinforcement architecture on the planar mechanical properties of 3D-printed continuous fiber-reinforced thermoplastic composites

Castillo, Rodrigo; Medina, Carlos

Article ISI
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY  (2023)

Study of the Antibacterial Capacity of a Biomaterial of Zeolites Saturated with Copper Ions (Cu2+) and Supported with Copper Oxide (CuO) Nanoparticles

Romero, Lina M. M.; Palacio, Daniel A. A.; Sanchez-Sanhueza, Gabriela A. A.; Perez, Eduardo G. G.; Solis, Francisco J. J.; Melendrez, Manuel F. F.; Medina, Carlos

Article ISI
NANOMATERIALS  (2023)

Supervised machine learning-based multi-class phase prediction in high-entropy alloys using robust databases

Medina, Carlos

Article ISI
JOURNAL OF ALLOYS AND COMPOUNDS  (2023)

Towards recycling of waste carbon fiber: Strength, morphology and structural features of recovered carbon fibers



Article ISI
WASTE MANAGEMENT  (2023)

Comparative study of fire-resistant coatings based on high and low molecular weight tannins

Berrio, M. E.

Article ISI
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH  (2022)

Dynamic numerical prediction of plasticity and damage in a turbofan blade containment test

Shekhar Prasad, Chandra; Medina, Carlos

Article ISI
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS  (2022)

Effect of 0.5% CNT reinforcement of a glass fiber composite on strength and cyclic damage induced by transverse and out-of-plane compressive loads

Medina, Carlos

Article ISI
JOURNAL OF COMPOSITE MATERIALS  (2022)

Environmental evaluation of applications of concrete with recycled material from tyre

Schwarz, Alex; Medina, Carlos

Article ISI SCOPUS
Proceedings of the Institution of Civil Engineers-Engineering Sustainability  (2022)

Evaluation of the Mechanical and Fire Resistance Properties of Rigid Tannin Polyurethane Foams with Copper Oxide Nanoparticles

Godoy, Mytzy; Elizabeth Berrio, Maria; Medina, Carlos

Article ISI
FIBERS AND POLYMERS  (2022)

Hybrid Materials Based on Nanoparticles Functionalized with Alkylsilanes Covalently Anchored to Epoxy Matrices

Andres Palacio, Daniel; Medina, Carlos

Article ISI
POLYMERS  (2022)

The effect of preheating of nano-filler composite resins on their degree of conversion and microfiltration in dental fillings

Montano, M.

Article ISI
POLYMER BULLETIN  (2022)

Condensed tannin resins extracted from Pinus radiata bark as a support matrix in carbon nanofiber-reinforced polymers

Martinez, J. C.

Article ISI
POLYMER BULLETIN  (2021)

Experimental Correlation of Mechanical Properties of the Ti-6Al-4V Alloy at Different Length Scales

Riu, Guiomar; Znaidi, Amna; Medina, Carlos; Mateo, Antonio Manuel; Roa, Joan Josep

Article
METALS  (2021)

Experimental Evaluation of Cement Mortars with End-of-Life Tyres Exposed to Different Surface Treatments

Urbano, Bruno; Medina, Carlos; Flores, Paulo

Article ISI
CRYSTALS  (2021)

Numerical Prediction of Failure in Unidirectional Fiber Reinforced Composite

Valdivia, Ignacio; Canales, Cristian; Flores, Paulo; Medina, Carlos

Article ISI
INTERNATIONAL JOURNAL OF APPLIED MECHANICS  (2021)

Ultrafast carbon nanotubes growth on recycled carbon fibers and their evaluation on interfacial shear strength in reinforced composites



Article ISI
Scientific Reports  (2021)

Experimental characterization of the compressive mechanical behaviour of Ti6Al4V alloy at constant strain rates over the full elastoplastic range

Flores, Paulo; Valenzuela, Marian; Medina, Carlos

Article ISI SCOPUS
International Journal of Material Forming  (2020)

Improvement of thermomechanical properties of composite based on hydroxyapatite functionalized with alkylsilanes in epoxy matrix



Article ISI SCOPUS
CERAMICS INTERNATIONAL  (2020)

SURFACE MODIFICATION OF RUBBER FROM END-OF-LIFE TIRES FOR USE IN CONCRETE: A DESIGN OF EXPERIMENTS APPROACH

Villa, Bárbara; Pradena, Mauricio; Flores, Paulo; Medina, Carlos

Article SCIELO
Journal of the Chilean Chemical Society  (2020)

Comparative Study of the Antimicrobial Effect of Nanocomposites and Composite Based on Poly(butylene adipate-co-terephthalate) Using Cu and Cu/Cu2O Nanoparticles and CuSO4



Article ISI SCOPUS
NANOSCALE RESEARCH LETTERS  (2019)

Comparative Study of the Antimicrobial Effect of Nanocomposites and Composite Based on Poly(butylene adipate-coterephthalate) Using Cu and Cu/Cu2O Nanoparticles and CuSO4

Jaramillo, Andres; Riquelme, Silvia; Sánchez-Sanhueza, Gabriela; Medina, Carlos; Solís-Pomar, Francisco; Rojas, David; Montalba, Cristobal; Melendrez, Manuel; Pérez-Tijerina, Eduardo.

Article
NANOSCALE RESEARCH LETTERS  (2019)

Correlation between mechanical and microstructural properties of vulcanized polyisoprene, polychloroprene, and nitrile-butadiene rubber subjected to accelerated thermal aging

Hernández F.E.

Article SCOPUS
Journal of Elastomers and Plastics  (2018)

Influence of aramid fibers on the mechanical behavior of a hybrid carbon-aramid-reinforced epoxy composite



Article ISI SCOPUS
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS  (2018)

INFLUENCE OF THE CONCENTRATION OF COPPER NANOPARTICLES ON THE THERMO‐MECHANICAL AND ANTIBACTERIAL PROPERTIES OF NANOCOMPOSITES BASED ON POLY(BUTYLENE ADIPATE‐CO‐TEREPHTHALATE)

Jaramillo, Andres F; Riquelme, Silvia; Montoya, Luis; Sanchez-Sanhueza, Gabriela; Medinam, Carlos; Rojas, David; Salazar, Fredy; Sanhueza, Juan P; Melendrez, Manuel F

Article
POLYMERS COMPOSITES  (2018)

Influence of the concentration of copper nanoparticles on the thermo‐mechanical and antibacterial properties of nanocomposites based on poly(butylene adipate‐co‐terephthalate)

Riquelme, Silvia; Rojas, David

Article
Polymers Composites  (2018)

Synthesis of Copper Nanowires and Their Antimicrobial Activity on Strains Isolated Persistent Endodontic Infections

Lopez, J.

Article ISI
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY  (2018)

The effect of molecular weight and hydrolysis degree of poly(vinyl alcohol)(PVA) on the thermal and mechanical properties of poly(lactic acid)/PVA blends

Medina, Carlos; Meruane, Viviana; Flores, Paulo

Article ISI SCOPUS
POLIMEROS-CIENCIA E TECNOLOGIA  (2018)

Development and characterization of polyvinyl alcohol stabilized polylactic acid/ZnO nanocomposites

Mangalaraja, R. V.

Article ISI SCOPUS
Materials Research Express  (2017)

Estimation of the surface interaction mechanism of ZnO nanoparticles modified with organosilane groups by Raman Spectroscopy

Baez-Cruz, R.; Montoya, L.F.

Article ISI SCOPUS
CERAMICS INTERNATIONAL  (2017)

Multiscale Characterization of Nanoengineered Fiber-Reinforced Composites: Effect of Carbon Nanotubes on the Out-of-Plane Mechanical Behavior

Naya, Fernando; Molina-Aldereguía, Jon

Article ISI SCOPUS
JOURNAL OF NANOMATERIALS  (2017)

Effect of ZnO nanoparticles obtained by arc discharge on thermo-mechanical properties of matrix thermoset nanocomposites

Medinam, C; Rojas D.; Flores P.; Meléndrez M.F.

Article ISI SCOPUS
JOURNAL OF APPLIED POLYMER SCIENCE  (2016)

Rapid synthesis and photocatalytic activity of ZnO nanowires obtained through microwave-assisted thermal decomposition

J. Lopez-Villareal; C. Medina; D. Rojas; AC Mera

Article ISI SCOPUS
CERAMICS INTERNATIONAL  (2016)

Quality and high yield synthesis of Ag nanowires by microwave-assisted hydrothermal method

Medina, C; Solis-Pomar, F; Flores P.; Paulraj, M.; Perez-Tijerina, E

Article ISI SCOPUS
Nanoscale Research Letters  (2015)

The influence of carbon fabric weave on the in-plane shear mechanical performance of epoxy fiber-reinforced laminates

Medina, Carlos; Canales, Cristian; Arango, Carolina; Flores, Paulo

Article ISI SCOPUS
JOURNAL OF COMPOSITE MATERIALS  (2014)

The effect of multiwall carbon nanotubes on the in-plane shear behavior of epoxy glass fiber reinforced composites

Fernandez, C.; Medina, C; Pincheira, G; Canales, C; Flores P.

Article ISI SCOPUS
Composites Part B: Engineering  (2013)

ConferencePaper (1)

Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials

Medinam, C; Molina-Aldareguía J.M.; Gonzalez, C.; Meléndrez M.F.; Flores P.; Llorca, J.

ConferencePaper SCOPUS
Journal of Composite Materials  (2015)

Proyecto (13)

Desarrollo de recubrimientos ignífugos e intumescentes para la protección de materiales

FONDEF (17i10333)

Proyecto
2018-2019
Investigador(a)

Barra Intercelda Segmentada Triple para Electro-refinación de Cobre

FONDEF (IT16M10001)

Proyecto
2017-2018
Investigador(a)

Desarrollo, Evaluación y Validación Tecnológica a Escala Semi-Industrial de un Motor Eléctrico de Alto Rendimiento para Aumentar la Producción y Mejorar la Eficiencia Energética en Minería

FONDEF (IT16M10000)

Proyecto
2017-2018
Investigador(a)

A STUDY OF THE INFLUENCE OF A CNT-MASTERBATCH IN MATRIX AND INTERFACE PROPERTIES ON THE OUT-OF-PLANE MACROSCOPIC MECHANICAL BEHAVIOR OF A MULTIFUNCTIONAL NANO-ENGINEERED COMPOSITE MATERIAL UNDER LOW CYCLE LOADING/UNLOADING

FONDECYT (11160285)

Proyecto
2016-2019
Inv. Responsable

Desarrollo de materiales nano piezoeléctricos para la generación de energía eléctrica renovable no convencional (ERNC) a partir de vibraciones mecánicas disponibles en el medioambiente

FONDEF (15I10312)

Proyecto
2015-2016
Personal técnico y/o de apoyo

Desarrollo de Nanomateriales biodegradables activos para su potencial uso en la elaboración de envases de alimentos termoformados

PAI (781411004)

Proyecto
2014-2015
Personal técnico y/o de apoyo

IMPROVEMENT OF THE WORKING LIFE OF STEEL GRINDING BALLS BY OPTIMIZING THEIR HARDNESS AND THEIR TENACITY

FONDECYT (1120002)

Proyecto
2013-2013
Personal técnico y/o de apoyo

Turbina eólica urbana de alto rendimiento

FONDEF (VIUR120004)

Proyecto
2013-2014
Director(a)

Turbina urbana de eje vertical para la generación de energía eléctrica

Innova BIOBIO (13.12-EM.CIE)

Proyecto
2013-2014
Director(a)

Desarrollo de turbinas eólica de alta eficiencia a bajas velocidades de viento

FONDEF (D08I1144)

Proyecto
2012-2012
Personal técnico y/o de apoyo

Diseño y desarrollo de un prototipo integrado para la síntesis masiva de nanoestructuras=> aplicaciones en nanocompuestos.

FONDEF (CA12i10308)

Proyecto
2012-2015
Inv. Principal

DESARROLLO DE POLíMEROS TERMOESTABLES REFORZADOS CON FIBRAS Y NANOPARTíCULAS PARA APLICACIONES DE ALTO DESEMPEÑO

FONDEF (D08I1138)

Proyecto
2011-2011
Tesista

DEVELOPMENT OF PROCESSING AND CHARACTERIZATION OF A SHAPE MEMORY HYBRID ALLOY BASED ON FUNCTIONALIZED NANOWIRES AND POLYLACTIC ACID=> A NOVEL MATERIAL FOR BIOCOMPATIBLE IMPLANTS

FONDECYT (11110347)

Proyecto
2011-2014
Personal técnico y/o de apoyo

2
manuel melendrez

research Professor

Department of Materials Engineering

UNIVERSIDAD DE CONCEPCIÓN

Concepción, Chile

7
Paulo Flores

Profesor asociado

Ingeniería Mecánica

University of Concepcion

Concepcion, Chile

1
MANGALARAJA Ramalinga Viswanathan

Profesor Titular

Departamento de Ingeniería de Materiales

UNIVERSITY OF CONCEPCION

Concepcion, Chile

1
Katherina Fernandez

Profesor Titular

Ingeniería Química

UNIVERSIDAD DE CONCEPCIÓN, FAC. INGENIERÍA, DEPTO. INGENIERÍA QUÍMICA

Concepción, Chile

1
Viviana Meruane

Professor

Department of Mechanical Engineering

UNIVERSIDAD DE CHILE, FACULTAD DE CS. FÍSICAS Y MATEMÁTICAS, DEPARTAMENTO DE INGENIERÍA MECÁNICA

Santiago, Chile

1
Paulraj Manidurai

Associate Professor

Physics

UNIVERSITY OF CONCEPCION

CONCEPCION, Chile

44
Carlos Medina

Profesor Asistente

Ingeniería Mecánica

Universidad de Concepción

Concepcion, Chile

1
Víctor Campos

Representante médico

Laboratorios Saval S.A.

Concepción, Chile

2
Cristobal Montalba

Docente/Investigador

Tecnologías Industriales

Universidad de Talca

Curicó, Chile

1
Adriana Mera

Investigador asociado al Instituto de Investigacion multidisplinario en ciencia y tecnología.

Quimica

UNIVERSIDAD DE LA SERENA

La Serena, Chile

1
Ali Akbarifakhrabadi

Associate professor

Ingeniería mecánica

UNIVERSIDAD DE CHILE

Santiago, Chile

1
Fredy Salazar

Profesor Colaborador

UNIVERSIDAD DE CONCEPCION

Concepción, Chile

1
Patricia Castaño

Investigador

Universidad de Concepción

Coronel, Chile

1
Noelia Benito

Profesora Asistente

Física

Universidad de Concepción

Concepción, Chile

5
Andres Jaramillo

Profesor Asistente

Ingeniería Mecánica

Universidad de La Frontera

Temuco, Chile

1
LUIS MONTOYA

Profesor asistente

Ingenieria Quimica

Univerisdad de Concepcion

Concepcion, Chile

2
Víctor Tuninetti

Profesor asistente

Facultad de Ingeniería y Ciencias

Universidad de La Frontera

Temuco, Chile

2
Saddys Rodríguez

Investigador

Centro de Investigación de Polímeros Avanzados

Concepción, Chile

1
Silvia Riquelme

Investigador

Departamento de ingeniería eléctrica

Universidad de Concepción

Concepcion, Chile

4
David Rojas

Docente

Materiales

Universidad de Cocnepcion

Concepción, Chile

1
Christopher Salvo

Académico

Departamento de Ingeniería Mecánica

Universidad del Bío-Bío

Concepción, Chile

3
Daniel Palacio

Profesor Asistente

Departamento de Polímeros

Universidad de Concepción

Concepción , Chile

1
Cecilia Fuentealba

INVESTIGADORA/INGENIERO DE PROYECTO

UNIDAD DE DESARRLLO TECNOLÓGICO

UNIDAD DE CONCEPCIÓN

CONCEPCIÓN, Chile

5
Cristian Canales

Profesor

Ingeniería Mecánica

Universidad de Concepción

Concepción, Chile

5
Gonzalo Pincheira

Profesor planta regular

Tecnologías Industriales

Universidad de Talca

Curicó, Chile

2
Ivan Restrepo

Investigador

Ingeniería de Materiales

Universidad de Concepcipon

Concepción, Chile

3
GABRIELA SANCHEZ

Profesor Asociado

Odontología Restauradora

Universidad de Concepción

Concepción, Chile

1
Nicolás Araya

Profesor Asistente

Departamento de Ingeniería de Materiales

Universidad de Concepción

Concepción, Chile

11
Angelo Onate

Profesor asistente

Ingeniería en Materiales

Universidad de Concepción

Concepción, Chile

1
Andrés Díaz

Investigador Científico

Departamento de Ingeniería de Materiales

Universidad de Concepción

Concepción, Chile

4
Jesus Ramirez

Docente Investigador

Minas

Universidad San Sebastián

Concepción, Chile

1
Claudio Villegas

Académico

Ingeniería Mecánica

Universidad del Bío-Bío

Concepción, Chile

1
Rodrigo Valle

7
Alexis Salas

Profesor Asistente

Ingenieria Mecánica

Universidad de Concepción

concepción, Chile