Mangal.jpg_thumb90

MANGALARAJA Ramalinga Viswanathan

Profesor Titular

UNIVERSITY OF CONCEPCION

Concepcion, Chile

Líneas de Investigación


Advanced Ceramics for Energy and Environment; Nanostructure Modification of Functional Ceramics; Micro-Nano-Structure-Property Relationship; Bioceramics; Nanophotocatalysts; Graphene/CNT composites: Cu based intermetallic materials; MAX/MXene phase.

Educación

  •  Materials Technology (Advanced Ceramics), Anna University. India, 2003
  •  Materials Technology (M.Tech.), Anna University. India, 1998
  •  Materials Science (M.Sc.), Anna University. India, 1995
  •  Physics, Madurai Kamaraj University. India, 1993

Experiencia Académica

  •   Profesor Titular Full Time

    UNIVERSIDAD DE CONCEPCION

    Facultad de Ingeniería

    Concepcion, Chile

    2013 - A la fecha

  •   Profesor Asociado Full Time

    UNIVERSIDAD DE CONCEPCION

    Facultad de Ingeniería

    Concepcion, Chile

    2010 - 2012

  •   Profesor Asistente Full Time

    UNIVERSIDAD DE CONCEPCION

    Facultad de Ingeniería

    Concepcion, Chile

    2006 - 2009

  •   Postdoctoral Researcher Full Time

    Luleå University of Technology

    Luleå, Suecia

    2005 - 2006

  •   Postdoctoral Researcher Full Time

    Anna University

    Madras Institute of Technology

    Chennai, India

    2004 - 2005

  •   Research Scientist (Postdoctoral Research) Full Time

    National Institute of Advanced Industrial Science and Technology

    Nagoya, Japón

    2003 - 2004

  •   Professor Titular Full Time

    UNIVERSIDAD DE CONCEPCION

    CONCEPCION, Chile

    2013 - A la fecha

Experiencia Profesional

  •   Profesor Titular Full Time

    Universidad de Concepcion

    Concepcion, Chile

    2013 - A la fecha

  •   Profesor Asociado Full Time

    Universidad de Concepcion

    Concepcion, Chile

    2010 - 2012

  •   Profesor Asistente Full Time

    Universidad de Concepcion

    Concepcion, Chile

    2006 - 2009

  •   Profesor Titular Full Time

    UNIVERSIDAD DE CONCEPCION

    Concepcion, Chile

    2013 - A la fecha

Formación de Capital Humano


Ultimos cinco años de Formación de Capital Humano:

Participación como profesor guía de tesis o memoria de título de PREGRADO:

Patrocinante:

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumna: Srta. Jennifer Gomez Gonzalez, “Desarrollo de aleaciones Cu-(15%)Nb3Sn y Cu-(10%)Co- (15%)Nb3Sn obtenidas por aleado mecánico para aplicaciones electro-magnéticas” Laboratorio Cerámico y Nanotecnología, DIMAT - Proyecto FONDECYT Nº 1100875, Finalizada 2013-1.

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumno: Sr. Pablo Horacio Hernández Castro, “Desarrollo y caracterización de aleaciones magnéticas reforzadas Cu90-X Co10 NiX - 7,5% SmCo5 obtenidas por aleado mecánico y consolidadas por compactación en caliente y moldeo de cinta” Laboratorio Cerámico y Nanotecnología, DIMAT - Proyecto FONDECYT Nº 1100875, Finalizada 2013-1.

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumno: Sr. Jonathan Usuba, Efecto del dispersante sobre electrolitos nano estructurados de Ce0.9Gd0.1O1.95 fabricados mediante colado de cinta y flash sintering, Laboratorio Cerámico y Nanotecnología, DIMAT, UDEC - Proyecto FONDECYT Nº 1130916, Finalizada 2014-2.

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumno: Srta. Camila Patricia Evelyn Castro, “Fabricación y caracterización de ánodos nano-estructurados de Ni-SDC por molde de cinta para celdas combustible de óxido sólido”, Laboratorio Cerámico y Nanotecnología, DIMAT, UDEC - Proyecto FONDECYT Nº 1130916, Finalizada 2015-2.

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumno: Sr. Felipe Manuel Inzunza Albornoz, “Obtención, síntesis y caracterización de gradientes de carburos cementados con matriz hierro-niquel", DIMAT, UDEC, Finalizada 2016-1.

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumno: Sr. Carlo Alberto Montecinos Zuñiga, “Diseño de gradientes de carburos cementados con matriz hierro-níquel-cobalto", DIMAT, UDEC, Finalizada 2016-1.

- Tesista de Ingeniería de Física – Nombre de Alumno: Sr. Gonzalo Andrés Abarzúa Riquelme, “Estudio de recubrimiento electrolítico GDC sobre ánodo en base a NiO-GDC para Celdas Combustible de Óxido Sólido", DIMAT, UDEC, Proyecto FONDEF ID14I10452, (2016-1), Finalizada 2016-2.

- Tesista de Ingeniería de Física – Nombre de Alumno: Srta. Yoselyn Angélica Sepúlveda Reyes, “Recubrimiento de cátodo LSCF y la caracterización de SOFC minitubulares", DIMAT, UDEC, Proyecto FONDEF ID15I10452, (2016-1), Finalizada en Noviembre 2016-2.

- Tesista de Ingeniería de Materiales – Nombre de Alumno: Sr. Brayam Stephano Morales Diaz, “Síntesis y caracteización de nanoestructura nucleo-coraza de CeO2-ZnO para absorción de luz ultra-violeta", DIMAT, UDEC, FONDEF ID15I10500, (2016-1) Finalizada en Noviembre 2016-2.

- Tesista de Ingeniería de Física – Nombre de Alumno: Sr. Nicolás Andres Pérez Julue, “Fabricación y caracterización de ánodo en base a NiO-SDC por extrusión y recubrimiento de electrolito SDC para Celdas Combustible de Óxido Sólido", DIMAT, UDEC, Proyecto FONDECYT Nº1130916, (2108-1) Finalizada en Noviembre 2018-1.

Co-Patrocinante:

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumno: Sr. Oscar Gutiérrez Riveros, Síntesis y caracterización de aleaciones magnéticas reforzadas Cu+8%Nd2Fe14B y 8%Nd2Fe14B + 5% Co, obtenidas por aleado mecánico y consolidada por diferentes técnicas”, Laboratorio Cerámico y Nanotecnología, DIMAT, UDEC - Proyecto FONDECYT Nº 1130831, En ejecución 2014-2.

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumno: Srta. Daniela Pilar León Schettino, “Estudio de aleaciones magnéticas compuestas Cu-CrB-NdFeB, obtenidas por aleado mecánico y consolidadas por extrusión y moldeo en cinta-sinterización”, Laboratorio Cerámico y Nanotecnología, DIMAT, UDEC - Proyecto FONDECYT Nº 1130831, Finalizada 2015-2.

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumno: Srta. Caludia Andrea Jerez Muñoz, “Obtención y caracterización de aleación compuesta Cu-8%Nb2SnC procesada por la ruta de la Pulvimetalurgia”, Laboratorio Cerámico y Nanotecnología, DIMAT, UDEC - Proyecto FONDECYT Nº 1130831, Finalizada 2016-1.

Participado en Comisión:

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumno: Sr. Francisco Vásquez Sáez, Diseño y calibración de un prototipo de descarga de arco para la síntesis masiva de nanoestructuras, DIMAT, UDEC - Finalizada 2014-2.

- Tesista de Ingeniería Civil de Materiales – Nombre de Alumno: Srta. Alexandra Elena Sepúlveda Rebolledo, Desarrollo de nanocompuestos multiferróicos inteligentes estructurado “Core-Shell” (núcleo-cascara) basado en óxido de grafeno para captadores de energía flexible y supercapacitores, DIMAT, UDEC - Finalizada 2014-2.

Participación como profesor guía (Patrocinante) de tesis de DOCTORADO:

Patrocinante:

- Tesista de Doctorado en Ciencia e Ingeniería de Materiales – Nombre de Alumno: Sr. A. Akbari-Fakhrabadi - “FABRICACIÓN Y CARACTERIZACIÓN DE LOS ELECTROLITOS DE GD-CEO2 Y LAS CARACTERÍSTICAS ELÉCTRICAS DE SEMICELDA DE SOFC ENSAMBLADAS” - Proyecto FONDECYT Nº 1100349 - Finalizada 2013-1.

- Tesista de Doctorado en Ciencia e Ingeniería de Materiales – Nombre de Alumna: Srta. Mahdiyeh Jamshidijam - “Effect of rare hearth dopants on nanoceria and the characterization of Ni-SDC minitubular anodes fabricated for SOFC assembly” (Efecto de dopantes de tierras raras sobre nano polvo de óxido de cerio y caracterización de ánodos mini tubulares de Ni-SDC fabricados para ensamble de SOFC)” - Proyecto FONDECYT Nº 1130916 - Finalizada 2015-1.

- Tesista de Doctorado en Ciencia e Ingeniería de Materiales – Nombre de Alumno: Sr. A. Miguel Angel Niño Galeano - “Moldeo acuoso en cinta de Ni- CeO2 dopado con Gadolinio basado como ánodo de soporte plano para celdas de combustible de óxido solido” - BECA CONICYT - Finalizada 2017-1.

En ejecución:

- Tesista de Doctorado en Ciencia e Ingeniería de Materiales – Nombre de Alumno: Sr. Felipe Abner Sanhueza - “Síntesis y caracterización de Nanoestructuras Núcleo-Coraza: Potenciales usos en Protección UV-BECA CONICYT – En ejecución y terminación en 2019-1.

- Tesista de Doctorado en Ciencia e Ingeniería de Materiales – Nombre de Alumno: Sr. Jonathan Usuba- “Estudio de la técnica flash sintering en materiales SOFC de baja temperatura fabricadas por tape casting y extrusion” - BECA CONICYT – En ejecución y terminación en 2019-2.

- Tesista de Doctorado en Ciencia e Ingeniería de Materiales – Nombre de Alumno: Sr. Saeed Farhang - “Development of ZnO-CeO2/CeO2-ZnO core shell nanostructures for UV protection - BECA UDEC – En ejecución y terminación en 2019-1.

- Tesista de Doctorado en Ciencia e Ingeniería de Materiales – Nombre de Alumno: Sr. Christopher Salvo - En ejecución - Investigaciones comprensivas del efecto de la fase MAX Ti2AlN en las carascteristicas estructurales y funcionales del cobre - En ejecución y terminación en 2019-2.

- Tesista de Doctorado en Ciencias mención en Química – Nombre de Alumno: Sr. Jorge Durango - En ejecución - Desarrollo de un prototipo escalable de celda de combustible de óxido sólido microtubular autosoportada sobre ánodos basados en NiO y CGO - En ejecución y terminación en 2019-2.

- Tesista de Doctorado en Energia – Nombre de Alumno: Sr. Gonzalo Abarzua - Desarrollo de un prototipo de stack de celda de combustible de óxido sólido en base a GDC - En ejecución y terminación 2020-2- Celdas Combustibles de Óxido de Solido (Iniciado en 2017-1).

- Tesista de Doctorado en Energia – Nombre de Alumno: Sr. Ramon Cobo - En ejecución - Celdas Combustibles de Óxido de Solido (Iniciado en 2018-1).

- Tesista de Doctorado en Energia – Nombre de Alumno: Sr. Host Flies - En ejecución - Celdas Combustibles de Óxido de Solido (Iniciado en 2018-1).

- Tesista de Doctorado en Energia – Nombre de Alumno: Srta. Camila Garfias- En ejecución - Celdas Combustibles de Óxido de Solido (Iniciado en 2018-1).

- Tesista de Doctorado en Energia – Nombre de Alumno: Sr. Erwin Sepulveda - En ejecución - Celdas Combustibles de Óxido de Solido (Iniciado en 2018-2).

Participado en Comisión:

- Sr. Critobal Fernando Montalba, Tesista de Doctorado en Ciencia e Ingeniería de Materiales – Development of hybrid metal matrix composites with structural and functional properties, Finalizada 2015-2.

Profesor Guía (Patrocinante) de Postdoctorado:

• Dr. P. Sathish kumar, Proyecto FONDECYT Postdoctorado (Nº 3120095), 2011-2014.

• Dr. T. Pandiyarajan, Proyecto FONDECYT Postdoctorado (Nº 3140178), 2013-2016.

• Dr. S. Naveenraj, Proyecto FONDECYT Postdoctorado (Nº 3150102), 2014-2017.

• Dr. Hernán Valle, Proyecto FONDEF Investigador-Ph.D (Nº ID14I10452), 2014-2015.

• Dr. N. Pugazhenthiran, Proyecto FONDECYT Postdoctorado (Nº 3160134), 2015-2018.

• Dr. Udayabhaskar Rednam, Proyecto FONDECYT Postdoctorado (Nº 3160142), 2015-2018.

• Dr. M. Rubyraj, Proyecto FONDECYT Postdoctorado (Nº 3160150), 2015-2018.

• Dr. T. Prabhakaran, Proyecto FONDECYT Postdoctorado (Nº 3160170), 2015-2018.

• Dr. Hernán Valle, Proyecto FONDECYT Postdoctorado (Nº 3160296), 2015-2018.

• Dr. T. Pandiyarajan, Proyecto FONDEF Investigador-Ph.D (Nº ID15I10500), 2016-2017.

• Dr. T. Dennyson Savariraj, Proyecto FONDECYT Postdoctorado (Nº 3170640), 2017-2020.

• Dr. Radhamanohar Aepuru, Proyecto FONDECYT Postdoctorado (Nº 3180176), 2018-2021.

• Dr. P. Gnanaprakasam, Proyecto FONDECYT Postdoctorado (Nº 3180172), 2018-2021.

• Dr. B. Gnana Sundara Raj, Proyecto FONDECYT Postdoctorado (Nº 3180172), 2020-2023.

• Dr. Mohammad Ashfaq, Proyecto FONDECYT Postdoctorado (Nº 3190515), 2020-2023.

• Dr. Neetu Talreja, Proyecto FONDECYT Postdoctorado (Nº 3190581), 2020-2023.

• Dr. L. Moorthi, Proyecto FONDECYT Postdoctorado (Nº 3200113), 2021-2024.

• Dr. A. Arulraj, Proyecto FONDECYT Postdoctorado (Nº 3200076), 2021-2024.

Otras Actividades:

- Fui visitado como Profesor Visitante (Octubre 2013- Enero 2014) en Energy Research Institute, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore (en el marco de Programa de Pasantias en el Extranjero – Programa Energia (Nº PASANTIA0027; ID Fast: 2750).


Difusión y Transferencia


Ultimos cinco años:

Participación en proyectos de investigación con financiamiento externo:

• Principal Investigator in the FONDECYT Project (Nº 1100349) titled, “Design, development and performance analysis of low temperature operating planar Gd-CeO2 SOFC cells: An economical next generation energy source”, Government of Chile, 2010-2013.
• Co-Investigator in the FONDECYT Project (Nº1100875) titled, “Structural, mechanical, electrical and magnetic characterization of noble copper intermetallic (SmCo5; Nb3Sn) nanostructured composite alloys performed by mechanical milling for electromagnetic functional applications". Government of Chile, 2010-2013.
• Research Guide Investigator in the FONDECYT Postdoctoral 2012 Project (Nº 3120095) titled, ‘Solar light and ultrasound assisted sonocatalytic degradation of organic contaminants in the presence of metal semiconductor nanocomposites/nanoparticles’, Government of Chile, 2011-2014.
• Investigator Responsible in the CONICYT Project – Programa de Pasantias en el Extranjero – Programa Energia (Nº PASANTIA0027; ID Fast: 2750) titled, “Investigation on the electrochemical performance of low temperature operating solid oxide fuel cells (LT-SOFCs) as portable power source”, Pasantia durante Octubre 2013 - Enero 2014.
• Principal Investigator in the FONDECYT Project (Nº 1130916) titled, “Fabrication and performance analysis of anode (Ni-SDC) supported tubular low temperature operating solid oxide fuel cell (LT-SOFC) and its stack assembly for high efficiency: An industrially viable and economical portable energy source”, Government of Chile, 2013-2016.
• Co-Investigator in the FONDECYT Project (Nº 1130831) titled, “Performance and characterization of novel copper soft-magnetic composite alloys fabricated by mechanical milling, tape casting and hot pressing techniques: An electromagnetic device for functional applications”, Government of Chile, 2013-2016.
• Investigador Resposible in the FONDEQUIP Project (Nº EQM130103) titled, ““Desarrollo de cerámicos óxidos / no óxidos, intermetálicos, compuestos y sus nanocompuestos de alta temperatura para aplicaciones en ingeniería y gestión térmica” Government of Chile, 2013-2016.
• Research Guide Investigator in the FONDECYT Postdoctoral 2014 Project (Nº 3140178) titled, Development of graphene-ZnO composite nanostructure thinfilms for solar cells, Government of Chile, 2013-2016.
• Director in the FONDEF IDeA 2014 en Dos Etapa Project (Nº ID14I10452) titled, “ Desarrollo de un prototipo de celdas de combustible de óxido sólido soportada sobre ánodos mini tubulares de Ni-GDC, como fuente de energía industrialmente viable“, Government of Chile, 2014-2016.
• Research Guide Investigator in the FONDECYT Postdoctoral 2015 Project (Nº 3150102) titled, Multispectroscopic investigation of in vitrio interactions between bioactive nanoparticles and serum albumins, Government of Chile, 2014-2017.
• Director in the FONDEF IDeA 2015 en Dos Etapa Project (Nº ID15I10500) titled, “Desarrollo de un prototipo de protector solar a base de nano estructuras núcleo-coraza (Core-Shell) de ZnO-CeO2 y CeO2-ZnO para el cuidado de la piel”, Government of Chile, 2015-2017.
• Research Guide Investigator in the FONDECYT Postdoctoral 2016 Project (Nº 3160134) titled, Carbonaceous material modified TiO2 nanostructure with esposed {0 0 1} facets photoanodes for dye-sensitized solar cells applications, Government of Chile, 2015-2018.
• Research Guide Investigator in the FONDECYT Postdoctoral 2016 Project (Nº 3160142) titled, Realization of metal-graphene nanocomposite based flexible transparent conducting electrodes, Government of Chile, 2015-2018.
• Research Guide Investigator in the FONDECYT Postdoctoral 2016 Project (Nº 3160150) titled, Perylene Diimide-Based Organic Cathode Materials for Lithium-Ion Batteries, Government of Chile, 2015-2018.
• Research Guide Investigator in the FONDECYT Postdoctoral 2016 Project (Nº 3160170) titled, Finding novel ferrite and ferrite nanocomposites for green refrigeration technology, Government of Chile, 2015-2018.
• Research Guide Investigator in the FONDECYT Postdoctoral 2016 Project (Nº 3160296) titled, Desarrollo de nanoparticulas copoliméricas basadas en metacrilato de (4,7-dicloroquinolin-2-il) metanol con potencial actividad anticáncer, Government of Chile, 2015-2018.

En ejecución:
• Co-Investigator in the FONDECYT Project (Nº 1161444) titled, “Development of foams of Ti-Tab-Sn alloys for biomedical application by powder metallurgy and the study of their corrosion/mechanical properties”, Government of Chile, 2016-2019.
• Research Guide Investigator in the FONDECYT Postdoctoral 2017 Project (Nº 3170328) titled, “Novel Photo electrode nanomaterials for photoelectrochemical applications: Reduction of atmospheric CO2 into hydrocarbon fuels and H2 production via water spiltting”, Gobierno de Chile, 2017-2020 ($ 150,000 USD).
• Research Guide Investigator in the FONDECYT Postdoctoral 2017 Project (Nº 3170640) titled, “Developing cost-effective, hybrid and green energy devices using metal chalcogenides (MC) as a hole transporting material for perovskite solar cells and as the electrode materials in super capacitor”, Gobierno de Chile, 2017-2020 ($ 150,000 USD).
• Director in the FONDEF IDeA 2014 en Dos Etapa (Segundo Etapa) Project (Nº ID14I20452) – Second Phase titled, “Desarrollo de un prototipo de celdas de combustible de óxido sólido soportada sobre ánodos mini tubulares de Ni-GDC, como fuente de energía industrialmente viable”, Government of Chile, 2017-2019 ($ 320,000 USD).
• Principal Investigator in the FONDEF IDeA 2017 en Dos Etapa Project (Nº ID17I10339) – titled, “ Desarrollo de un prototipo de filtro de aire con cobre magnetizado para la reducción de carga bacteriana en recintos cerrados/contaminados”, Government of Chile, 2018-2020 ($ 320,000 USD).
• Investigator Responsible in the FONDECYT Project (Nº 1181703) titled, “Design and development of La-pervoskite-type materials based mini-tubular reversible solid oxide cell for electrical energy generation and hydrogen fuel production”, Government of Chile, 2018-2022.
• Research Guide Investigator in the FONDECYT Postdoctoral 2018 Project (Nº 3180176) titled, “Multifunctional Flexible Nanocomposites: Investigation of Carrier Dynamics, Design and Development of Energy Harvesting Driven Self-powered Broadband Photodetectors”, Gobierno de Chile, 2018-2021 ($ 150,000 USD).
• Research Guide Investigator in the FONDECYT Postdoctoral 2018 Project (Nº 3180172) titled, “Engineering transition metal chalcogenides anchored heteroatom doped graphene nanostructures for PEM fuel cells”, Gobierno de Chile, 2018-2021 ($ 150,000 USD).
• Research Guide Investigator in the FONDECYT Postdoctoral 2018 Project (Nº 3180309) titled, “Development of novel and high performance (1-x) (La0.7Sr0.3MnO3) - (x) (BiFeO3) nanocomposites by chemical route and study its magnetoelectric coupling for memory and sensors applications”, Gobierno de Chile, 2018-2021 ($ 150,000 USD).
• Research Guide Investigator in the FONDECYT Postdoctoral 2018 Project (Nº 3180576) titled, “Developing exchange-coupled binary alloy nanocomposites for high performance magnetic applications”, Gobierno de Chile, 2018-2021 ($ 150,000 USD).
• Director in the FONDEF IDeA 2018 Project (Nº ID18I10337) titled, “Diseño De Un Prototipo De Celda De Combustible Microbiana, En Base A Grafeno Nano-Estructurado, Capaz De Tratar Aguas Residuales Y Generar Energía Eléctrica En El Proceso”, Government of Chile, 2018-2020 ($ 320,000 USD).
Particpacion en comites editorial de congresos o revistas:

Editorial Board Member:

1. Editorial Board Member in the International Journal of Nanomaterials, Nanotechnology and Nanomedicine, ISSN: 2455-3492, (http://www.peertechz.com/Nanomaterials-Nanotechnology-Nanomedicine/)

2. Editorial Board Member in the Journal of Materials Science & Research, (https://www.jscimedcentral.com/Materials/)

3. Editorial Board Member in the International Journal of Advanced Chemical Science and Applications, ISSN: 2347-7601,
(http://www.irdindia.in/journal_ijacsa/index.html)

4. Editorial Board Member in the International Journal, Conference Papers on Materials Science, till 2015 (http://www.hindawi.com/cpis/ms/editors/)

5. Editorial Board Member in Revista SAM (Asociación Argentina de Materiales) http://www.materiales-sam.org.ar/sitio/consejoEditores.html

Comite Scientifico en el Congreso:
Miembro en el Comité Cientifico en el Congreso SAM-CONAMET, Octubre 21-24, Santa Fe, Argentina (http://www.unl.edu.ar/materiales2014/index.php?act=showSubcategoria&id=45)
Miembro, Comité Cientifico, XV Encuentro Química Inorgánica, Catillo 2014, Sociedad Chilena de Química.
Miembro, Comité Cientifico, del 15º Congreso Intenacional de Metalurgia y Materiales (CONAMET-SAM 2017), November 17-20, Facultad de Ingenieria, Universidad de Concepción, Concepción, Chile.

Comite Consultivo Internacional de Congreso:
International Advisory Committee Member, International conference on green technologies for environmental pollution control and prevention (ICGTEPC 2014), 27-29, September 2014, NIT, Tiruchirappalli, India. (http://gtepc.in.committee.html).
International Advisory Committee Member, International conference on emerging technologies in computing control & communications (ICETCCC-2k15), 2015, Arunachala College of Engineering for Women, Tamil Nadu, India. (http://www.arunachalacollege.com/icetccc-2k15/international_advisory_committee.html)

Chairman en Congeso:
1. Acted as Chairman for the session: Materials and Environment, at the International Materials Research Congress, August 14-20, 2016, Cancun, Mexico.

Organizador de Congresos Internacionales:
1. Como el Presidente de la Sociedad Chilena de Metalurgia y Materiales (SOCHMM) y Vice-Presidente del 15º Congreso Intenacional de Metalurgia y Materiales (CONAMET-SAM 2017), November 17-20, Facultad de Ingeniería, Universidad de Concepción, Concepción, Chile.

2. Organizador de 3rd Pan American Materials Congreso, February 26-March 2, 2017, San Diego, California. (http://www.tms.org/meetings/annual-17/AM17PanAmCongress.aspx).

3. Organizador International Conference on Membrane Technology & its Applications (ICMST17), February 21-23, 2017, NIT-Tiruchirappalli, India. (http://www.icmst2017.com/)

Participación Como Experto:
1. Integrante en FONDECYT INGENIERÍA Grupo 1 (desde Marzo 2015 hasta 2018)
2. Evaluador Integrante en CONICYT Becas Doctorado y Magíster (desde 2015)
3. Evaluador: Proyectos FONDECYT (desde 2010), CONICYT Intercambio (2014) CONICYT-PAI (2015), CONICYT-Postdoc Extranjería (2016)
4. Actuó como referee para las varios revistas internacionales y evaluador de 4 Ph.D internacionales


Premios y Distinciones

  •   PRESIDENTE

    Sociedad Chilena de Metalurgia y Materiales (SOCHMM)

    Chile, 2015

    Elegido y actuó como Presidente de Sociedad Chilena de Metalurgia y Materiales (SOCHMM) para el periodo 2015-2017.

  •   Asignación Académica

    UNIVERSIDAD DE CONCEPCION

    Chile, 2014

    Asignación Académica: Jan. 2014 - Dec. 2016. Recibiendo la mismo asignación en los últimos 10 años para excelencia de académica.

  •   Académic Evaluation-SOBRESALIENTE

    UNIVERSIDAD DE CONCEPCION

    Chile, 2015

    Recibiendo "SOBRESALIENTE" en la evaluación de la académica para últimos 10 años.


 

Article (236)

Hybrid nanoparticles from chitosan and nickel for enhanced biocidal activities
( )Role of electrolytes on the electrochemical characteristics of Fe3O4/MXene/RGO composites for supercapacitor applications
A novel bimetallic (Fe/Bi)-povidone-iodine micro-flowers composite for photocatalytic and antibacterial applications
A Study on the Phase Formation and Magnetic Properties of FeNiCoCuM (M = Mo, Nb) High-Entropy Alloys Processed Through Powder Metallurgy
Bimetal (Fe/Zn) doped BiOI photocatalyst: An effective photodegradation of tetracycline and bacteria
Biocidal activity of citrus limetta peel extract mediated green synthesized silver quantum dots against MCF-7 cancer cells and pathogenic bacteria
BiOCl ultrathin nanosheets modified with Fe3+ for enhanced visible light driven photocatalytic activity
Black Trumpet Mushroom-like ZnS incorporated with Cu3P: Noble metal free photocatalyst for superior photocatalytic H-2 production
Enhanced electrocatalytic activity of CuO-SnO2 nanocomposite in alkaline medium
Microstructure, electrical and mechanical properties of Ti2AlN MAX phase reinforced copper matrix composites processed by hot pressing
Microwave synthesis of beta-Cu2V2O7 nanorods: structural, electrochemical supercapacitance, and photocatalytic properties
One pot in situ synthesis of nano Au-Pd core-shells embedded on reduced graphene oxide for the oxygen reduction reaction
Synthesis and Characterization of a Nearly Single Bulk Ti2AlN MAX Phase Obtained from Ti/AlN Powder Mixture through Spark Plasma Sintering
Thermally Reduced Soft Magnetic CuFe Nanoparticles for High-Performance Electrical Devices
ANTIBACTERIAL ACTIVITY AND FLUORESCENCE PROPERTIES OF 4,7-DICHLORO-2-QUINOLINEMETHYLACRYLATE
Ascendable method for the fabrication of micro-tubular solid oxide fuel cells by ram-extrusion technique
Colorimetric determination of cysteamine based on the aggregation of polyvinylpyrrolidone-stabilized silver nanoparticles
Columnar structure growth of Mn-doped ZnO (MZO) thin films by radio frequency co-sputtering and studies on films properties
Development of an electrochemical enzyme-free glucose sensor based on self-assembled Pt-Pd bimetallic nanosuperlattices
Effect of Sn on synthesis of nanocrystalline Ti-based alloy with fcc structure
Electric field controlled near-infrared high-speed electro-optic switching modulator integrated with 2D MgO
Fault Analysis of Worm Gear Box Using Symlets Wavelet
Fluorine-free synthesis of reduced graphene oxide modified anatase TiO2 nanoflowers photoanode with highly exposed {001} facets for high performance dye-sensitized solar cell
Heterogeneous sonocatalytic activation of peroxomonosulphate in the presence of CoFe2O4/TiO2 nanocatalysts for the degradation of Acid Blue 113 in an aqueous environment
Insight into the binding and conformational changes of hemoglobin/lysozyme with bimetallic alloy nanoparticles using various spectroscopic approaches
Large pi-Conjugated Condensed Perylene-Based Aromatic Polyimide as Organic Cathode for Lithium-Ion Batteries
Magnetically recyclable CoFe2O4/ZnO nanocatalysts for the efficient catalytic degradation of Acid Blue 113 under ambient conditions
Microwave-assisted synthesis of localized surface plasmon resonance enhanced bismuth selenide (Bi2Se3) layers for non-enzymatic glucose sensing
Perylenedianhydride-Based Polyimides as Organic Cathodes for Rechargeable Lithium and Sodium Batteries
Polarization-Induced Quantum-Mechanical Charge Transfer in Perovskite-Graphene Nanocomposites with Superior Electro-optic Switching Modulation
Single-line diffraction and microstructural analysis of NiO(x)GDC((1-x)) nanocomposites
Single-phase and binary phase nanogranular ferrites for magnetic hyperthermia application
Size dependent magnetic and capacitive performance of MnFe2O4 magnetic nanoparticles
Study of Effect of Linear Tip Relief Modification in Power Transmission Efficiency of Spur Gears
Study on Flexural Properties of Lotus, Eucalyptus Composites Reinforced with Epoxy and E-glass Fibers in Different Orientations
Synthesis of hierarchical Mn3O4 nanowires on reduced graphene oxide nanoarchitecture as effective pseudocapacitive electrodes for capacitive desalination application
Tailoring the performance of mechanically robust highly conducting Silver/3D graphene aerogels with superior electromagnetic shielding effectiveness
Ultrasound-Assisted Room Temperature Synthesis of Flower-Like-Bi5O7I-Incorporated Reduced Graphene Oxide Nanosheets for Highly Efficient Visible-Light Photocatalytic Activity
A facile hydrothermal synthesis of CeO2 nanocubes decorated ZnO nanostructures: optical and enhanced photocatalytic properties
Carbon decorated octahedral shaped Fe3O4 and alpha-Fe2O3 magnetic hybrid nanomaterials for next generation supercapacitor applications
Chitosan capped copper oxide/copper nanoparticles encapsulated microbial resistant nanocomposite films
Effect of ultrasonic sonication time on the structural, optical and antibacterial properties of ceria nanostructures
Enhanced mechanical and electrical properties of novel graphene reinforced copper matrix composites
Evaluation of microstructural and electrical properties of tubular Ni-Ce0.8Sm0.2O1.9 composite anode for SOFC
Flash sintering of one-step synthesized NiO-Ce0.9Gd0.1O1.95 (NiO-GDC) composite
Flexural properties of areca nut, sunn hemp and e-glass fibers reinforced with epoxy composites
Fly Ash Constituent-Silica and Alumina Role in the Synthesis and Characterization of Cordierite Based Ceramics
Fly ash constituent-silica anda lumina role in the synthesis and charaterization of cordierite based ceramics
Influence of refluxing time and HMTA on structural and optical properties of rod, prism like ZnO nanostructures
Mechanically enhanced novel Ti-based alloy foams obtained by hot pressing
Mechanically enhannced novel Ti-based alloy foams obtained by hot pressing
Modulation of optical and photocatalytic properties by morphology and microstrain in hierarchical ceria nanostructures
Nano hexagonal C3O4 platelets for supercapacitor applications-synthesis and characterization
Nanoparticles of 4,7-dichloro-2-quinolinemethylacrlylate-based copolymers and their potencial cytotoxic activity on human breast carcinoma cells
Nanoparticles of 4,7-dichloro-2-quinolinemethylacrylate-based copolymers and their potential cytotoxic activity on human breast carcinoma cells
Probing the Defect-Induced Magnetocaloric Effect on Ferrite/Graphene Functional Nanocomposites and their Magnetic Hyperthermia
Processing and characterization of AA2024/Al2O3/SiC reinforced hybrid composites using squeeze casting technique
Processing and characterization of AA2024/Al2O3/SiC reinforces hybrid composites using squeeze casting technique
Simple sonochemical synthesis of lanthanum tungstate (La-2(WO4)(3))( ) nanoparticles as an enhanced electrocatalyst for the selective electrochemical determination of anti-scald-inhibitor diphenylamine
Statistical features of epoxi resin based hybrid composites reinforced with jute, banana and flax natural fibres
Structural study of novel nanocrystalline fcc Ti-Ta-Sn alloy
Structural, morphological, optical and magnetic properties of RF sputtered Co doped ZnO diluted magnetic semiconductor for spintronic applications
Tartaric acid mediated gelation synthesis of zinc oxide nanoparticles and its photocatalytic activity
The influence of mechanical activation process on the microstructure and mechanical properties of bulk Ti2AlN MAX phase obtained by reactive hot pressing
Tuning of non-linear absorption in high luminescent CdSe based quantum dots with core-shell and core/multi-shell architecture
Tuning of nonlinear absorption in highly luminescent CdSe based quantum dots with core-shell and core/multi-shell architectures
Unraveling the synergistic influences of graphene and CuO on the structural, photon and phonon properties of graphene:CuO nanocomposites
A general microwave synthesis of metal (Ni, Cu, Zn) selenide nanoparticles and their competitive interaction with human serum albumin
A multispectroscopic and molecular docking investigation of the binding interaction between serum albumins and acid orange dye
Automatic fault classification for journal bearings using ANN and DNN
Controlling the size and magnetic properties of nano CoFe2O4 by microwave assisted co-precipitation method
Development of miniaturizad high energy field varistors
Effect of capping agents on the structural and magnetic properties of cobalt ferrite nanoparticles
Effect of reduced graphene oxide on the structural, optical, adsorption and photocatalytic properties of iron oxide nanoparticles
Effect of reduced graphene oxide on the structural, optical, adsorption and photocatalytic property of iron oxide nanoparticles
Graphene induced band gap widening and luminescence quenching in ceria:graphene nanocomposites
Green synthesis of porous Au-Nx-TiO2 nanospheres for solar light induced photocatalytic degradation of di-azo, tri-azo dyes and their eco-toxic effects
Magnetic properties and photocatalytic behavior of Co-coped BiFeO3:Er
Magnetocaloric Effect and Universal Curve Behavior in Superparamagnetic Zinc Ferrite Nanoparticles Synthesized via Microwave Assisted Co-Precipitation Method
RAPID ROOM TEMPERATURE LIQUID PHASE SYNTHESIS OF DIETHYL 2-((4-NITROANILINO) METHYLENE) MALONATE
Rapid room temperature liquid phase synthesis of dietil 2-((4-nitroanilino)methylene) malonate
Simple and low-cost synthesis of CuO nanosheets for visible-light-driven photocatalytic degradation of textile dyes
Solid-state synthesis and characterization of α-Fe2O3@ZnO nanocomposites with enhanced visible light driven photocatalytic activity
Studies on NiO-PVA Composite Films for Opto-Electronics and Optical Limiters
Sunlight-Induced photochemical synthesis of Au nanodots on alpha-Fe2O3@Reduced graphene oxide nanocomposite and their enhanced heterogeneous catalytic properties
Sunlight-induced photochemical synthesis of Au nanodots on α-Fe2O3@reduced graphene oxide nanocomposite and their enhanced heterogeneous catalytic properties
The effect of alumina particles on the microstructural and mechanical properties of copper foams fabricated by space-holder method
Ultra small plasmonic nanoparticles decorated hierarchical mesoporous TiO2 as an efficient photocatalyst for photocatalytic degradation of textile dyes
Ultrasmall Plasmonic Nanoparticles Decorated Hierarchical Mesoporous TiO2 as an Efficient Photocatalyst for Photocatalytic Degradation of Textile Dyes
A statistical analysis on the wear behaviour of an epoxy resin, reinforced with biaxial glass fibres, silicon carbide and alumninium oxide
Degradation of azo dyes under different wavelengths of UV light with chitosan-SnO2 nanocomposites
Development and characterization of polyvinyl alcohol stabilized polylactic acid/ZnO nanocomposites
Development and characterization of polyvinyl alcohols stabilized polylactic acid/ZnO nanocomposites
Effect of flash sintering on microstructure of Ce0.9Gd0.1O1.95 electrolyte fabricated by tape-casting
Effect of flash sintering on the microstructure of Ce0.9Gd0.1O1.95 electrolyte fabricated by tape casting
Effects of mechanical milling on the structural, mechanical and electromagnetic properties of Cu-8wt%NdFeB composites alloys
High catalytic activity of monometallic Ag, Cu nanostructures in degradation of Acid Blue 113 dye: an electron relay effect
High-efficiency dye-sensitized solar cells fabricated using D-D-pi-A (donor-donor/pi-spacer-acceptor) architecture
Improvement of the BiOI photocatalytic activity optimizing the solvothermal synthesis
Influence of imide-substituents on the H-type aggregates of perylene diimides bearing cetyloxy side-chains at bay positions
Influence of imide-substituents on the H-type aggregates of perylene diimides bearing cetyloxy side-chains at bay positions
Influence of rare earth (RE=Nd, Y, Pr and Er) doping on the microstructural and optical properties of ceria nanostructures
Microstructure and magnetic properties of Cu90-xCo10Nix-7.5% SmCo5 composite alloys prepared by mechanical alloying and hot pressing
Sonochemical synthesis of CuO nanostructures and their morphology dependent optical and visible light driven photocatalytic properties
Sonochemical synthesis of porous NiTiO3 nanorods for photocatalytic degradation of ceftiofur sodium
Spectroscopic investigation on graphene-copper nanocomposites with strong UV emission and high catalytic activity
Spectroscopic investigation on graphene-copper nanocomposites with strong UV emission and high catalytic activity
Structural investigation and sonocatalytic efficiency of Ce0.9Nd0.1O1.95 and Ce0.9Pr0.1O1.95 nanocatalysts
Structural investigation and sonocatalytic efficiency of Ce0.9Nd0.1O1.95 and Ce0.9Pr0.1O1.95 nanocatalysts
Studies on the functional properties of free-standing polyvinyl alcohol/(CoFe2O4/CoFe2) composite Films
Study on the microstructural evolution of Ti-Nb based alloy obtained by high-energy ball milling
Synthesis of Co2+-doped Fe2O3 photocatalyst for degradation of pararosaniline dye
Synthesis of Ni0.2Fe1.8O3/polyaniline magnetic nanocomposite with excellent photocatalytic activity
Synthesis of Ni0.2Fe1.8O3/polyaniline magnetic nanocomposite with excellent photocatalytic activity
The effect of calcination temperature on the structural and magnetic properties of co-precipitated CoFe2O4 nanoparticles
The effect of reaction temperature on the structural and magnetic properties of nano CoFe2O4
The effects of mechanical milling on the structural, mechanical, and electromagnetic properties of Cu-8 wt% NdFeB composite alloys
The structural, magnetic and magnetic entropy changes on CoFe2O4/CoFe2 composites for magnetic refrigeration application
Ultrasound assisted synthesis of morphology tunable rGO:ZnO hybrid nanostructures and their optical and UV-A light driven photocatalysis
Chemiluminescence studies between aqueous phase synthesized mercaptosuccinic acid capped cadmium telluride quantum dots and luminol-H2O2
Effect of co-doping on the optical, magnetic and photocatalytic properties of the Gd modified BiFeO3
Effect of rare earth dopants on structural and mechanical properties of nanoceria synthesized by combustion method
Enhanced blue light emission in transparent ZnO:PVA nanocomposite free standing polymer films
Gold Triangular Nanoprisms and Nanodecahedra: Synthesis and Interaction Studies with Luminol toward Biosensor Applications
Impact damage hardness and tribological characterization of epoxy resin based composites reinforced with basalto fibres in combination with TiO2, BaSO4 and SiC
Industrial synthesis and characterization of nanophotocatalysts materials: titania
Influence of divalent Ni and trivalent Cr ions on the properties of ytterbium modified bismuth ferrite
Insights into the binding of photothermal therapeutic agent bismuth sulfide nanorods with human serum albumin
Microstress, strain, band gap tuning and photocatalytic properties of thermally annealed and Cu-doped ZnO nanoparticles
Microstructure, vibrational and visible emission properties of low frequency ultrasound (42 kHz) assisted ZnO nanostructures
Sol-gel synthesis and characterisation of (Nd, Cr) co-doped BiFeO3 nanoparticles
Sonochemical synthesis of Cu2O nanocubes for enhanced chemiluminescence applications
Sonophotocatalytic mineralization of Norflurazon in aqueous environment
Studies on the structural, quantitative and semi-quantitative analyses of NiO-GDC nanocomposites
Effect of (Nd, Ni) co-doped on the multiferroic and photocatalytic properties of BiFeO3
Electrochemical degradation of C.I. Reactive Orange 107 using Gadolinium (Gd3+), Neodymium (Nd3+) and Samarium (Sm3+) doped cerium oxide nanoparticles
Enhanced Fluorescence, Raman Scattering, and Higher Order Raman Modes in ZnO:Ag Nanorods
Enhanced ultraviolet fluorescence in surface modified ZnO nanostructures: Effect of PANI
Evaluation of impregnated nanocomposite membranes for aqueous methanol electrochemical reforming
Fabrication and electrochemical characterization of Pt-Pd impregnated nanocomposite polymer electrolyte membranes for high concentration DMFCs
Formation of Carbon Nanotube Forest over Spin-coated Fe2O3 Reduced Thin-film by Chemical Vapor Deposition
Low frequency ultrasound assisted sequential and co-precipitation syntheses of nanoporous RE (Gd and Sm) doped cerium oxide
Low frequency ultrasound assisted synthesis of La0.6Sr0.4Co0.2Fe0.8O3 (- delta) (LSCF) perovskite nanostructures
Microwave accelerated synthesis of zinc oxide nanoplates and their enhanced photocatalytic activity under UV and solar illuminations
Morphology controlled synthesis of Sm doped ZnO nanostructures for photodegradation studies of Acid Blue 113 under UV-A light
Preparation and characterization of TiO2-sulfonated polymer embedded polyetherimide membranes for effective desalination application
Preparation of nanosized yttrium doped CeO2 catalyst used for photocatalytic application
PTCR behavior of BiFeO3 synthesized by the solvothermal method
Structural and Optical Properties of Pr3+ Doped ZnO and PVA:Zn98Pr2O Nanocomposite Free Standing Film'
Structural, magnetic and photocatalytic properties of La and alkaline co-doped BiFeO3 nanoparticles
UV-A light-induced photodegradation of Acid Blue 113 in the presence of Sm-doped ZnO nanostructures
Effect of rare earth dopants on structural characteristics of nanoceria synthesized by combustion method
Enhanced fluorescence and optical power limiting in Ag-nanocomposite glasses
Low frequency ultrasound (42 kHz) assisted degradation of Acid Blue 113 in the presence of visible light driven rare earth nanoclusters loaded TiO2 nanophotocatalysts
Porous to dense LaPO4 sintered ceramics for advanced refractories
Sonophotocatalytic (42 kHz) degradation of Simazine in the presence of Au-TiO2 nanocatalysts
Sonophotocatalytic degradation of Acid Blue 113 in the presence of rare earth nanoclusters loaded TiO2 nanophotocatalysts
Structural studies on the gadolinium doped nanoceria prepared by combustion synthesis
Synthesis of nano intermetallic Nb3Sn by mechanical alloying and annealing at low temperature
The Effect of Mode of addition and aggitation on the morphology of NanoHAp in Coprecipitaion Method
Bulk ZnO nanorod assemblies fabricated by spin coating of organo-precursor gels on CuO nanowires
CoFe2O4/TiO2 nanocatalysts for the photocatalytic degradation of Reactive Red 120 in aqueous solutions in the presence and absence of electron acceptors
Combustion Synthesis of Nanocomposite LSCF-GDC Cathode Material and Electrical Characteristics of Half-Cell Configured SOFC Assembly
Electrocatalytic oxidation of reactive blue using Sm3+ doped cerium oxide as a catalyst
Fabrication and characterization of a diluted magnetic semiconducting TM co-doped Al:ZnO (TM = Co, Ni) thin films by sol-gel spin coating method
Growth and Improvement of ZnO Nanostructure Using Aged Solution by Flow Coating Process
Influence of fuel in the microwave assisted combustion synthesis of nano α-alumina powder
Mechanical Properties of Gd-CeO2 Electrolyte for SOFC Prepared by Aqueous Tape Casting
Montmorillonite-carbon nanotube nanofillers by acetylene decomposition using catalytic CVD
Photocatalytic degradation of ternary dye mixture in aqueous environment using gold nanoparticles loaded amino and mercapto functionalized TiMCM-41 nanocatalysts in the presence of visible light
Room temperature ferromagnetism in combustion synthesized nanocrystalline Co, Al co-doped ZnO
Sintering, microstructure and dielectric properties of MgO doped alumina ceramics co-doped with Gd3O2, and Pr6O2
Sintering, microstructure and dielectric properties of MgO doped alumina ceramics co-oped with Gd2O3 and Pr2O6
STRUCTURAL ANALYSIS OF THE COMBUSTION SYNTHESIZED Y3+ DOPED CERIA (Ce0.9Y0.1O1.95)
Thermal annealing induced structural and optical properties of Ca doped ZnO nanoparticles
Wear Behavior of Multiwalled Carbon Nanotube/AZ31 Composite Obtained by Friction Stir Processing
ZnO supported CoFe2O4 nanophotocatalysts for the mineralization of Direct Blue 71 in aqueous environments
Carbon nanotubes rooted montmorillonite (CNT-MM) reinforced nanocomposite membrane for PEM fuel cells
Combustion synthesis of Co,Al co-doped nano ZnO (Zn1-x-y Cox Aly O) and its functional properties
Combustion synthesis of nanocrystalline co and al co-doped Zno (Zn 1-x-y CO xAl yo) and its powder characteristics
Combustion synthesis of nanocrystalline Co and Al co-doped ZnO (Zn1-x-yCoxAlyO) and its powder characteristics
Combustion synthesis of NiO-Ce0.9Gd0.1O1.95 nanocomposite anode and its electrical characteristics of semi-cell configured SOFC assembly
Electrical and thermal characterization of Sm3+ doped ceria electrolytes synthesized by combustion technique
Evaluation of mechanical hardness and fracture toughness of Co and Al co-doped ZnO
Fabrication and characterization of Co, Al:ZnO thin films by a sol-gel spin coating technique for ferromagnetic applications
Fabrication of nanostructured clay-carbon nanotube hybrid nanofiller by chemical vapour deposition
Fabrication of room temperature ferromagnetic Co,Al:ZnO thin film by sol-gel spin coating technique for ferromagnetic applications
Influence of Impurities in Cathodic Copper on the Ductility of Copper Wires
Magnetic and structural properties of hot pressed Cu-SmCo5 composites obtained by mechanical alloying
Multifunctional ZnO-biopolymer nanocomposite coatings for health-care polymer foams and fabrics
Nanostructured Gd-CeO2 electrolyte for solid oxide fuel cell by aqueous tape casting
Room temperature synthesis and optical studies on Ag and Au mixed nanocomposite polyvinylpyrrolidone polymer films
Synthesis and characterization of Gd 3+ and Sm 3+ ion doped ceria electrolytes through an in-situ sulphated combustion technique
Synthesis and characterization of Gd3+ and Sm3+ ion doped ceria electrolytes through an in-situ sulphated combustion technique
Synthesis and characterization of Gd3+ and Sm3+ ions doped ceria electrolytes through in-situ sulphated combustion technique
Synthesis of metal intercalated clay catalysts for selective hydrogenation reactions
Synthesis of metal intercalated nanoclay catalysts for selective hydrogenation reactions
Microstructural characterization of Cu95Co5 and Cu90Co5Ni5 copper-based alloys obtained through mechanical alloy and synthesization [Caracterizacion microestructural de las aleaciones base cobre Cu 95Co5 y Cu90Co5Ni5 obtenidas por aleado mecanico y sinterizacion]
Microwave assisted citrate gel combustion synthesis of ZnO Part-I: assessment of structural features
Microwave assisted citrate gel combustion synthesis of ZnO Part-II: assessment of functional properties
Microwave assisted citrate-gel combustion synthesis of ZnO: Part I –Assessment of structural features
Microwave assisted citrate-gel combustion synthesis of ZnO: Part II –Assessment of functional properties
Nanosized Noble Metals Intercalated in Clay as Catalysts for Selective Hydrogenation
Sintering of surfactant modified ZnO-Bi2O3 based varistor nanopowders
Studies on the evolution of ZnO morphologies in a thermohydrolysis technique and evaluation of their functional properties
Study of precipitation hardening in lead calcium tin anodes for copper electrowinning
Synthesis and characterization of porous shell-like nano hydroxyapatite using Cetrimide as template
Synthesis and mechanical properties of low temperature sintered, Sm3+ doped nanoceria electrolyte membranes for IT-SOFC applications
Synthesis ZnO based nanopowders via a non-hydrolytic sol-gel technique and their densification behaviour and varistor properties
A facile approach to hexagonal ZnO nanorod assembly
Electrical and thermal properties of 10 mol% Gd3+ doped ceria electrolytes synthesized through citrate combustion technique
Microhardness and fracture toughness of Ce0.9Gd0.1O1.95 for manufacturing solid oxide electrolytes
Microwave assisted combustion synthesis of nanocrystalline yttria and its powder characteristics
Sintering, microstructural and mechanical characterization of combustion synthesized y2O3 and Yb3+-Y2O 3
Sintering, microstructural and mechanical characterization of combustion synthesized Y2O3 and Yb3+-Y2O3
Synthesis of nanocrystalline yttria through in-situ sulphated-combustion technique
Combustion synthesis of Y2O3 and Yb-Y2O3 Part I. Nanopowders and their characterization
Effect of composition on initial permeability of Ni1-xZnxFe2O4 prepared by flash combustion technique
Evidence of Jahn-Teller distortion in LixMn2O4 by thermal diffusivity measurements
Mechanical characterization of Ni1-xZnxFe2O4 prepared by non-conventional methods
Synthesis of nanocrystalline yttria by microwave-assisted citrate-gel decomposition technique
Direct synthesis of varistor-grade doped nanocrystalline ZnO and its densification through a step-sintering technique
Microwave-flash combustion synthesis of yttria nanopowders
Microwave-Flash Combustion Synthesis of Yttria Nanopowders for Transparent Ceramics
Fabrication and Fuel Cell Properties of Gd-Doped CeO2 Micro-Tube Ceramics Reactors Prepared by Gel Precursor
Synthesis and Characterisation of Ce0.9Gd0.1Ox Nanopowders by Citrate-Gel Decomposition technique
Characterization of Mn0.8Zn0.2Fe2O4 synthesized by flash combustion technique
Electrical and magnetic properties of Ni 0.8 Zn 0.2 Fe 2 O 4 /silica composite prepared by sol-gel method
Microwave-flash combustion synthesis of Ni0.8Zn0.2Fe2O4 and its dielectric characterization
Dielectric behavior of Ni1−xZnxFe2O4 prepared by flash combustion technique
Direct current resistivity studies of Ni1−xZnxFe2O4 prepared through flash combustion and citrate-gel decomposition techniques
Effect of ceria on the physical, mechanical and thermal properties of yttria stabilized zirconia toughened alumina
Initial permeability studies of Ni–Zn ferrites prepared by flash combustion technique
Magnetic hysteresis studies of Ni1−xZnxFe2O4 prepared by non-conventional techniques
Effect of Composition on AC-Electrical Resistivity of Ni-Zn Ferrites Prepared by Flash Combustion Technique
Magnetic, electrical and dielectric behaviour of Ni0.8Zn0.2Fe2O4 prepared through flash combustion technique

BookSection (11)

Metal–Organic Framework-based Disposable Sensors
Advanced Conducting Polymers for Electrochemical Applications
Role of Innovative Material in Electrochemical Glucose Sensors
Contemporary Achievements of Visible Light-Driven Nanocatalysts for the Environmental Applications
Function of Photoanode: Charge Transfer Dynamics, Challenges, and Alternative Strategies
Reduced Graphene Oxide-Based Photocatalysis
Chapter 7: Spectroscopic investigation on rGO:ZnO composites nanostructures
Chapter 8: Photocatalysis as an effective advanced oxidation process
Sonophotocatalytic mineralization of environmental contaminants present in aqueous solutions
Microwave assisted combustion synthesis of mixed oxide electro-ceramic nanopowders
Studies on Dielectric Behaviour of Ni0.8 Zn0.2 Fe2O4 Processed Through Novel Techniques

BookWhole (2)

Proceedings of the 3rd Pan American Materials Congress
Microwave assisted combustion (MAC) synthesis of mixed oxide electro-ceramic nanopowders

ConferencePaper (7)

Tartaric Acid Mediated Gelation Synthesis of Zinc Oxide Nanoparticles and their Photocatalytic Activity
Effects of milling time on structural and magnetic properties of Cu10wt%Co15wt%Nb3sn Alloys consolidated by hot pressing
Synthesis and characterization of nano crystalline hydroxyapatite spheroids using anionic template for bio applications
Influence of the milling time on Mechanical and Magnetic properties of Cu(90)Co(5)Ni(5) alloy obtained by Mechanical Alloying
Performance and properties of Cu-SmCo5 functional composite materials
The structure and its dependence on the magnetic properties of Ni 5CoXCu95-X alloys produced by mechanical alloying and subsequent annealing
The structure and its dependence on the magnetic properties of Ni(5)Co(X)Cu(95-X) alloys produced by mechanical alloying and subsequent annealing

Patent (2)

Método para la preparación de nueva generación de ZnO: CeO2 núcleo: cascara espesor (varilla y esférica) materiales regulables para aplicaciones de blindaje ultravioleta
Una formulación y un proceso para elaborar una pasta cerámica útil para la producción de ánodos de celdas combustibles de óxido sólido minitubular soportadas sobre ánodo

Proyecto (39)

Desarrollo de un prototipo de sistema de tratamiento integral de alta eficiencia para la remoción de arsénico del agua acoplado a un proceso de fotocatálisis para su estabilización y disposición segura para el medio ambiente
Rational Design of Ultra low platinum to Atomically Dispersed Metal Catalysts for Electro-reduction of Oxygen in Polymer Electrolyte Membrane Fuel Cells
Rational designing of nanostructured ternery electrocatalysis for water splitting using photoelectrochemical cells
Photocatalytic oxidation of ethylene emissions from fruit storage facilities under simulated visible light irradiation using reduced graphene oxide modified anatase black TiO2  nanostructures with exposed {001} at low-temperature and high relative humidity
Polymer-Metal Nanosheets-Polymer-based Sandwich Composite Materials On Flexible Substrate For High-Performance Flexible Perovskite Solar Cells
“Micro-Nano-Channels Based Polymer-MXenes Photocatalytic Nanofiltration Membrane on PET substrate: A Novel Filter Assembly for Tetracyclin removal from Water
Design light-weight, ultra-thin flexible and cost effective hybrid nanostructures as electrode materials high-energy storage applications
Fuel Cell Lifespan extensión in Hybrid Systems: Energy Management Strategies for Electromobility
Desarrollo de un prototipo de filtro de aire con cobre magnetizado para la reducción de carga bacteriana en recintos cerrados/contaminados
Design and development of La-pervoskite-type materials based mini-tubular reversible solid oxide cell for electrical energy generation and hydrogen fuel production
Developing exchange-coupled binary alloy nanocomposites for high performance magnetic applications
Development of novel and high performance (1-x) (La0.7Sr0.3MnO3) - (x) (BiFeO3) nanocomposites by chemical route and study its magnetoelectric coupling for memory and sensors applications
Diseño De Un Prototipo De Celda De Combustible Microbiana, En Base A Grafeno Nano-Estructurado, Capaz De Tratar Aguas Residuales Y Generar Energía Eléctrica En El Proceso
Engineering transition metal chalcogenides anchored heteroatom doped graphene nanostructures for PEM fuel cells
Multifunctional Flexible Nanocomposites=> Investigation of Carrier Dynamics, Design and Development of Energy Harvesting Driven Self-powered Broadband Photodetectors
Desarrollo de un prototipo de celdas de combustible de óxido sólido soportada sobre ánodos mini tubulares de Ni-GDC, como fuente de energía industrialmente viable
Developing cost-effective, hybrid and green energy devices using metal chalcogenides (MC) as a hole transporting material for perovskite solar cells and as the electrode materials in super capacitor
Novel Photo electrode nanomaterials for photoelectrochemical applications=> Reduction of atmospheric CO2 into hydrocarbon fuels and H2 production via water spiltting
Development of foams of Ti-Tab-Sn alloys for biomedical application by powder metallurgy and the study of their corrosion/mechanical properties
Carbonaceous material modified TiO2 nanostructure with esposed {0 0 1} facets photoanodes for dye-sensitized solar cells applications (Investigador Patrocinante)
Desarrollo de nanoparticulas copoliméricas basadas en metacrilato de (4,7-dicloroquinolin-2-il) metanol con potencial actividad anticáncer (Investigador Patrocinante).
Desarrollo de un prototipo de protector solar a base de nano estructuras núcleo-coraza (Core-Shell) de ZnO-CeO2 y CeO2-ZnO para el cuidado de la piel
Finding novel ferrite and ferrite nanocomposites for green refrigeration technology (Investigador Patrocinante)
Perylene Diimide-Based Organic Cathode Materials for Lithium-Ion Batteries (Investigador Patrocinante).
Realization of metal-graphene nanocomposite based flexible transparent conducting electrodes (Investigador Patrocinante)
Desarrollo de un prototipo de celdas de combustible de óxido sólido soportada sobre ánodos mini tubulares de Ni-GDC, como fuente de energía industrialmente viable.
Multispectroscopic investigation of in vitrio interactions between bioactive nanoparticles and serum albumins (Investigador Patrocinante)
Desarrollo de cerámicos óxidos / no óxidos, intermetálicos, compuestos y sus nanocompuestos de alta temperatura para aplicaciones en ingeniería y gestión térmica
Development of graphene-ZnO composite nanostructure thinfilms for solar cells (Investigador Patrocinante)
Fabrication and performance analysis of anode (Ni-SDC) supported tubular low temperature operating solid oxide fuel cell (LT-SOFC) and its stack assembly for high efficiency=> An industrially viable and economical portable energy source.
Performance and characterization of novel copper soft-magnetic composite alloys fabricated by mechanical milling, tape casting and hot pressing techniques=> An electromagnetic device for functional applications.
Investigation on the electrochemical performance of low temperature operating solid oxide fuel cells (LT-SOFCs) as portable power source-Programa de Pasantias en el Extranjero – Programa Energia 2012 (Nº PASANTIA0027; ID Fast=> 2750)
Solar light and ultrasound assisted sonocatalytic degradation of organic contaminants in the presence of metal semiconductor nanocomposites/nanoparticles (Investigador Patrocinante)
Design, development and performance analysis of low temperature operating planar Gd-CeO2 SOFC cells=> An economical next generation energy source
Preparation and characterization studies of sol-gel derived ferromagnetic Zn1-x-y CoxAlyO thin film for non-volatile memory, spin FETs, spin LEDs and solar cell applications (Investigador Patrocinante)
Structural, mechanical, electrical and magnetic characterization of noble copper intermetallic (SmCo5; Nb3Sn) nanostructured composite alloys performed by mechanical milling for electromagnetic functional applications
Development of Carbon Nanotubes Based Composite Materials for Fuel Cells Applications (Investigador Patrocinante)
International Collaborative Project (Nº 7080176) funded by FONDECYT-Development of Processing and Characterization of Ceria Based Materials for Solid Oxide Fuel Cell applications=> Synthesis of Nanopowders and Its Sintering Characteristics
Development of Processing and Characterization of Ceria Based Materials for Solid Oxide Fuel Cell applications=> Synthesis of Nanopowders and Its Sintering Characteristics

Review (1)

Review on the recent improvements in sonochemical and combined sonochemical oxidation processes - A powerful tool for destruction of environmental contaminants
265
MANGALARAJA Ramalinga Viswanathan

Profesor Titular

Departamento de Ingeniería de Materiales

UNIVERSITY OF CONCEPCION

Concepcion, Chile

22
UDAYABHASKAR REDNAM

PROFESOR ASOCIADO

DEPARTAMENTO DE MECÁNICA

UNIVERSIDAD TECNOLÓGICA METROPOLITANA

Santiago, Chile

17
Ali Akbarifakhrabadi

Associate professor

Ingeniería mecánica

UNIVERSIDAD DE CHILE

Santiago, Chile

13
David Contreras

Full professor

Analitycal and Inorganic Chemistry

UNIVERSIDAD DE CONCEPCION

Concepción, Chile

10
PANDIYARAJAN Thangaraj

Principal Investigator

Departamento de Ingeniería de Materiales

UNIVERSIDAD DE CONCEPCION

Concepcion, Chile

10
Venkata Surya Ramam Koduri

PROFESOR ASOCIADO

DEPT. DE INGENIERIA DE MATERIALS DIMAT

UNIVERSIDAD DE CONCEPCION

CONCEPCION, Chile

9
Christopher Salvo

Académico

Departamento de Ingeniería Mecánica

Universidad del Bío-Bío

Concepción, Chile

7
Jonathan Usuba

Profesor asistente

Departamento de Ingeniería Mecánica

Universidad de La Frontera

Temuco, Chile

7
Arun Thirumurugan

Profesor Asistente

UNIVERSITY OF ATACAMA

Vallenar, Chile

7
Pugazhenthiran Nalandhiran

Assistant Professor

Chemistry

Universidad Técnica Federico Santa María

Valparaiso, Chile

4
FELIPE SANHUEZA

Profesor Asistente

Departamento de Ingeniería de Materiales

Universidad de Concepción

Concepción, Chile

4
PRABHAKARAN THANDAPANI

Post-doctoral Researcher (Fondecyt)

Department of Materials Engineering

University of Concepcion, Concepcion

CONCEPCION, Chile

4
SAEED FARHANG SAHLEVANI

Assistant Professor

Faculty of Engineering and Architecture

Universidad Arturo Prat

Iquique, Chile

4
Venkata Naga Radha Manohar Rao Aepuru

Academico

Ingeneria Mecanica

Universidad de Chile

Santiago, Chile

4
Juliano Casagrande

Profesor Titular

Fisica

UNIVERSIDAD DE SANTIAGO DE CHILE

Santiago, Chile

4
Nestor Escalona

Professor Associated

Chemical Engineering and Bioprocesses

Pontificia Universidad Católica de Chile

Santiago, Chile

3
Claudia Carrasco

Profesor Titular

Ingeniería de materiales

Universidad de Concepción

Concepción, Chile

3
SURESH Ranganathan

Assistant Professor

Chemistry

EASWARI ENGINEERING COLLEGE, Chennai, INDIA

Chennai, India

3
Saravanan Rajendran

Professor

Mechanical Engineering

Universidad de Tarapacá

Arica, Chile

2
Romel Jiménez

Full Professor

Chemical Engineering

UNIVERSIDAD DE CONCEPCIÓN

Concepción, Chile

2
Francisco Gracia

Associate Professor

Departament of Chemical Engineering, Biotechnology and Materials

UNIVERSIDAD DE CHILE

Santiago, Chile

2
VINOTH VICTOR LAZARAS

Postdoctoral Investigator

chemistry

Universidad Técnica Federico Santa María

Valparaiso, Chile

2
Bernabe Rivas

Professor

Polymers

Universidad de Concepción

Concepción, Chile

2
Shanmugaraj Krishnamoorthy

Assistant Professor

Department of Chemistry

Universidad de Tarapacá

Arica, Chile

2
Orlando Prat

UNIVERSIDAD DE CONCEPCIÓN

Concepción, Chile

2
Varaprasad Kokkarachedu

Profesor Asistente

Facultad de Ingeniería y Tecnología

Universidad San Sebastián

Concepción, Chile, Chile

2
Hector Valdes

UNIVERSIDAD CATOLICA DE LA SANTISIMA CONCEPCION

CONCEPCION, Chile

2
Claudio Aguilar

Professor

Metallurgy and Materials

Universidad Tecnica Federico Santa María

Valparaíso, Chile

2
Marta Lorena Lopez

Profesor Titular

Departamento de Ingeniería de Materiales

UNIVERSIDAD DE CONCEPCION

CONCEPCION, Chile

1
SAMUEL HEVIA

Associate Professor

Physics

PONTIFICIA UNIVERSIDAD CATÓLICA DE CHILE

Santiago, Chile

1
Helia Bello

Full Professor

Microbiologia

UNIVERSIDAD DE CONCEPCION

Concepción, Chile

1
JORGE DURANGO

Profesor part time

Departamento de fisicoquímica

Universidad de Concepción

Concepción, Chile

1
Eimmy Ramírez

Investigador Postdoctorado

Departamento de Química Analítica e Inorgánica

Universidad de Concepción

Concepción, Chile

1
Carla Herrera

Profesora Asistente

Fisicoquímica

Universidad de Concepción

Concepción, Chile

1
Elizabeth Elgueta

Académica e Investigadora

Química Ambiental

Universidad Católica de la Santísima Concepción

Concepción, Chile

1
Emky Valdebenito

Investigador

Biofiltración

Procycla Spa.

Santiago, Chile

1
Rafael Melo

Academico Investigador

Facultad de Ingenieria y Arquitectura

Universidad Central de Chile

Santiago, Chile

1
RADHA PYARASANI

Profesora Auxiliar

Centro de investigacion de estudios avanzados del maule (CIEAM))

Universidad Católica del Maule

Talca, Chile

1
Karem Tello

Profesora Asistente

Ingeniería Metalúrgica y de Materiales

Universidad Tecnica Federico Santa María

Valparaíso, Chile

1
Carolina Parra

Young Researcher. Head of Nanobiomaterials Laboratory

Physics

UNIVERSIDAD TECNICA FEDERICO SANTA MARIA

Valparaíso, Chile

1
Carlos Medina

Profesor Asistente

Ingeniería Mecánica

Universidad de Concepción

Concepcion, Chile

1
John Amalraj

Associate Professor

Instituto de Quimica de Recursos Naturales

Universidad de Talca

Talca, Chile

1
Pablo Aqueveque

Profesor Titular

Departamento de Ingeniería Eléctrica

Universidad de Concepción

Concepcion, Chile

1
Noelia Benito

Profesora Asistente

Física

Universidad de Concepción

Concepción, Chile

1
Ivan Restrepo

Investigador

Ingeniería de Materiales

Universidad de Concepcipon

Concepción, Chile

1
Saddys Rodríguez

Investigador

Centro de Investigación de Polímeros Avanzados

Concepción, Chile

1
Adriana Mera

Investigador asociado al Instituto de Investigacion multidisplinario en ciencia y tecnología.

Quimica

UNIVERSIDAD DE LA SERENA

La Serena, Chile

1
Ricardo Henriquez

Professor

Physics

UNIVERSIDAD TECNICA FEDERICO SANTA MARIA

Valparaiso, Chile

1
Homero Urrutia

Profesor titular

Facultad de Ciencias Biológicas

UNIVERSIDAD DE CONCEPCIÓN

Concepción, Chile

1
Natalia Padilla

Investigadora Fondef ID19I10382

Centro de Biotecnología

Universidad de Concepción

Concepción, Chile

1
Guilherme Neves

Académico

Ingeniería Mecánica

Universidad del Bío-Bío

Concepción, Chile

1
CARLOS RODRIGUEZ

Académico Investigador

Instituto de Investigación Multidisciplinario en Ciencia y tecnología

UNIVERSIDAD DE LA SERENA

La Serena, Chile

1
Hector Pesenti

Academico

de Obras Civiles y Geología

Universidad Catolica de Temuco

Temuco, Chile

1
rodrigo palma

Director

Ingeniería Mecánica

Universidad de Chile

Santiago, Chile

1
Carola Vergara

Profesor Asociado

Departamento de Análisis Instrumental

Universidad de Concepción

Concepcion, Chile

1
Viviana Meruane

Professor

Department of Mechanical Engineering

UNIVERSIDAD DE CHILE, FACULTAD DE CS. FÍSICAS Y MATEMÁTICAS, DEPARTAMENTO DE INGENIERÍA MECÁNICA

Santiago, Chile

1
Rafael Garcia

Profesor Titular

Fisico-Quimica

UNIVERSIDAD DE CONCEPCIÓN

Concepción, Chile

1
Mohamed Dahrouch

Academico

Organica

UNIVERSIDAD DE CONCEPCIÓN

Concepción, Chile

1
Paulraj Manidurai

Associate Professor

Physics

UNIVERSITY OF CONCEPCION

CONCEPCION, Chile

1
Andreas Rosenkranz

Prof.

Department of Chemical Engineering, Biotechnology and Materials

Universidad de Chile

Santiago, Chile

1
Hector Mansilla

PROFESSOR

ORGANIC CHEMISTRY

FACULTAD DE CIENCIAS QUÍMICAS

Concepción, Chile

1
Praveen Murugesan

Postdoctoral Fellow

Faculty of Engineering and Science

Universidad Adolfo Ibánez

Santiago, Chile

1
VIJYAYABHASKARA RAO BHAVIRIPUDI

Profesor Asistente

Departamento de Fisica

Universidad Tecnológica Metropolitana

Santiago, Chile