PDI - Resultado de Búsqueda

Claudia Andrea Carrasco Carrasco

Profesor Titular

Universidad de Concepción

Concepción, Chile

Materiales para aplicaciones energéticas; Caracterización de materiales; reciclaje de materiales

Ingeniería metalurgica, UNIVERSIDAD DE CONCEPCION. Chile, 2002
ingeniero civil metalúrgico, UNIVERSIDAD DE CONCEPCION. Chile, 1995

Profesor asistente Full Time

UNIVERSIDAD DE CONCEPCION

Ingeniería

Concepción, Chile

2004 - 2010
Profesor asociado Full Time

UNIVERSIDAD DE CONCEPCION

Ingeniería

Concepción, Chile

2010 - 2017
Profesor titular Full Time

Ingeniería

Concepción, Chile

2018 - A la fecha

Ingeniero Full Time

Moly-Cop Chile

Concepción, Chile

1995 - 1997

• Profesora guía de + 40 memorias de título de estudiantes de ingeniería civil de materiales, + 10 de ingeniería civil metalúrgica y + 5 ingenieros civiles químicos. Co-guía de memorias de título de estudiantes de física, química e ingeniería física.
• Directora de tesis de estudiantes de doctorado: 10 finalizadas, 4 en ejecución.

Participación en programa exploradores: El potencial del hidrógeno verde en Chile
https://www.youtube.com/watch?v=Hwgd7QfH_Sc

Participación programa derecho al futuro: Economía circular
https://www.tvu.cl/programas/derecho-al-futuro/2019/12/16/economia-circular-y-su-impacto-en-el-desarrollo-regional.html

Reportaje Diario Concepción: Patente de invención material para electrodos en electrólisis ácida
https://www.diarioconcepcion.cl/economia/2020/09/20/udec-cerca-de-produccion-de-hidrogeno-verde.html

Participación Misión Cavendish, Tour 2021 – Club de Innovación
https://clubdeinnovacion.com/cavendishtour-recursos/ (cuarta jornada)

Ciclo de seminarios Pemer: “Nuevos mercados, el hidrógeno y nuevas tecnologías II”
https://ingenieria.uchile.cl/noticias/173024/pemer-exitoso-ciclo-de-seminarios-sobre-transformacion-energet

Reconocimiento Impacto de Publicaciones

UNIVERSIDAD DE CONCEPCION

Chile, 2021

Publicación mayor índice de impacto en el período


Effect of Mg and Ca precipitates in the stability of Fe-Mn-Ni anodes used in alkaline seawater electrolysis Article ISI JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2024)
Electrocoagulation of landfill leachate: Transforming a hazardous residue into a source of irrigation water Pizarro-Castillo, Luis; Yeber, Maria Article ISI JOURNAL OF ENVIRONMENTAL MANAGEMENT (2024)
Operational variable effect on the COD removal efficiency using electrocoagulation in landfill leachate treatment Article ISI ENVIRONMENTAL SCIENCE-WATER RESEARCH & TECHNOLOGY (2023)
Superficial Grain Refinement of 316L Stainless Steel by Rolling with Rough Rolls Camurri, Carlos; Zapata-Hernandez, Oscar Article ISI MATERIALS (2023)
The effect of sintering temperature on the properties of the BiOCl films for potential application in DSSC Bizarro, M.; Blesa, Maria-Jesus Article ISI CERAMICS INTERNATIONAL (2023)
Use of copper sheet in a solar photo-Fenton-like process applied in the treatment of landfill leachate Poblete, Rodrigo; Rodriguez, Carlos Anibal Article ISI ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2023)
Critical aspects in the development of anodes for use in seawater electrolysis Delplancke J.L. Article INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)
Evaluation of flow accelerated corrosion and mechanical performance of martensitic steel T91 for a ternary mixture of molten salts for CSP plants Pineda, Fabiola; Mendoza, Magin; Vergara, Victor; Fuentealba, Edward Article ISI SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)
Extreme arid conditions: Association among soiling characteristics, transmittance loss and climatic conditions Moran, Luis Article SOLAR ENERGY (2022)
Heating Pre-Treatment of Copper Ores and Its Effects on the Bond Work Index Article MINERALS (2022)
Corrosion evaluation by electrochemical real-time tracking of VM12 martensitic steel in a ternary molten salt mixture with lithium nitrates for CSP plants Pineda, Fabiola; Henriquez, Mauro; Fuentealba, Edward Article ISI SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)
Low-cost Pb-Co-Sn film for the oxygen evolution reaction in acid media Delplancke J.L. Article ISI JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)
Synthesis and characterization of nanostructured Pb-Co-Sn film for the oxygen evolution reaction in sulfuric acid media Lara, Carolina; Pinto, Haroldo; da Silva, Erenilton Pereira; Slawik, Sebastian Article ISI JOURNAL OF NANOPARTICLE RESEARCH (2021)
Effect of supporting electrolyte concentration on one-step electrodeposited CuInS2 films for ZnS/CuInS2 solar cell applications Mera, A. Article ISI JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2020)
Study of anticorrosive coatings based on high and low molecular weight polyphenols extracted from the Pine radiata bark Schwederski, B. Article PROGRESS IN ORGANIC COATINGS (2019)
Synthesis and structural analysis of electrodeposited Pb-Co films for oxygen evolution applications Delplancke J.L.; Arellano-Jiménez M. Josefina; Soldera, F. Article Materials characteization (2019)
Application of electrocoagulation for the efficient pollutants removal to reuse the treated wastewater in the dyeing process of the textile industry Yeber, M.; Cisternas, N. Article JOURNAL OF HAZARDOUS MATERIALS (2019)
Synthesis and structural analysis of electrodeposited Pb-Co films for oxygen evolution applications Maril, M.; Tobosque, P.; Núñez, J.; Rodríguez C.A., Delplancke M.P.; Delplancke J.L., Yacaman M.; Arellano-Jiménez M. Josefina, Soldera; F., Carrasco Article MATERIALS CHARACTERIZATION (2019)
Study of the early growth stages of chemically deposited ZnS thin films from a non-toxic solution Floes, M.; Sandovl-Paz, M. Article MATERIALS RESEARCH EXPRESS (2018)
Lead-Based Anodes for Copper Electrowinning: Effect of Grain Size on Mechanical and Anticorrosion Properties Article MATERIALS TRANSACTIONS (2018)
Lead-Based Anodes for Copper Electrowinning=> Effect of Grain Size on Mechanical and Anticorrosion Properties Camurri, C.; Carrasco, C.; Maril, Y.; Peralta, J. Article MATERIALS TRANSACTIONS (2018)
Study of the early growth stages of chemically deposited ZnS thin films from a non-toxic solution Rodriguez, CA; Sandoval-Paz, M Article ISI SCOPUS MATERIALS RESEARCH EXPRESS (2018)
Effect of different complexing agents on Pb–Co thin-film electrodeposition Rodríguez, C.A.; Tobosque, P.; Maril, M.; Camurri, C.; Basáez, L.; Delplancke, M.P.; Carrasco, C. Article JOURNAL OF MATERIALS SCIENCE (2017)
Electrodeposition of Lead-Cobalt Anodes: The Effect of Electrolyte pH on Film Properties Article ISI SCOPUS Journal of the Electrochemical Society (2017)
Energy Efficiency Monitoring in a Coal Boiler Based on Optical Variables and Artificial Intelligence Garcés H, Abreu J.; Gómez P., Carrasco C.; Arias L, Rojas A Article IFAC-PAPERSONLINE (2017)
Optimal deformation hardening in lead base anodes for copper electrowinning for an appropiate working life Camurri, C.; Carrasco, C.; Maril, Y. Article Materials Science Forum (2017)
Comprehensive study of growth mechanism and properties of low Zn content Cd1-xZnxS thin films by chemical bath Rodríguez, C.A.; Sandoval-Paz, M.G.; Saavedra, R.; Trejo-Cruz, C.; De La Carrera, F.; Aragon, L.E.; Sirena, M.; Delplancke, M.-P.; Carrasco, C. Article Materials research (2016)
Radiation measurement based on spectral emissions in industrial flames Garces H.O.; Arias, L; Rojas A.J.; Carrasco, C.; Fuentes, A.; Farias O. Article ISI SCOPUS Measurement (2016)
Radiation measurement based on spectral emissions in industrial flames Garces H.O., Arias L.; Rojas, A.J.; Carrasco, C; Fuentes, A. Article Measurement=> Journal of the International Measurement Confederation (2016)
Proposed heat treatment conditions to improve toughness of steel grinding balls Camurri, C; Carrasco, C.; Zapata-Hernandez, O; Reyes L.; Colàs R.; de Oca, NGM Article ISI METALLURGIA ITALIANA (2015)
Proposed heat treatment conditions to improve toughness of steel grinding balls Camurri C., Carrasco; C, Zapata-Hernàndez O.; Reyes L, Colàs R. Article Metallurgia Italiana (2015)
Quenching simulation of steel grinding balls Zapata-Hernandez, O; Reyes, LA; Camurri, C; Carrasco, C.; Garza-Montes-de-Oca, NF; Colàs R. Article ISI SCOPUS Revista de Metalurgia (2015)
Quenching simulation of steel quenching grinding balls Oscar Zapata-Hernández, Luis A. Reyes; Carlos Camurri, Claudia carrasco; Nelson Garza-Montes-de-Oca, Rafael colas Article Revista de Metalurgia (2015)
Synthesis, characterization and optical properties of ATiO(3)-Pr thin films prepared by a photochemical method (where A = Ba and Ca) Cabello, G; Lillo L.; Caro, C; Seguel, M.; Huentupil, Y.; Chornik, B; Carrasco, C.; Rodriguez, CA Article ISI SCOPUS Materials Research Bulletin (2015)
Synthesis, characterization and optical properties of ATiO3-Pr thin films prepared by a photochemical method (where A = Ba and Ca) G. Cabello, L. Lillo; C. Caro, M. Seguel; G.E. Buono-Core, Y. Huentupil; B. Chornik, C. Carrasco Article Materials Research Bulletin (2015)
Characterization of ZnS thin films synthesized through a non-toxic precursors chemical bath C.A. Rodríguez, M.G. Sandoval-Paz; G. Cabello, M. Flores; H. Fernández, C. Carrasco Article Materials Research Bulletin (2014)
Characterization of ZnS thin films Synthesized through a non-toxic precursors chemical bath Rodriguez,C. A.; Cabello, G; Flores, M; Fernandez, H; Carrasco, C. Article ISI SCOPUS MATERIALS RESEARCH BULLETIN (2014)
Horse chestnut (Aesculus hippocastanum L.) starch: Basic physico-chemical characteristics and use as thermoplastic material Castaño J.; Rodriguez-Llamazares, S; Contreras, K.; Carrasco, C.; Pozo, C.; Bouza, R; Franco, CML; Giraldo, D. Article ISI SCOPUS CARBOHYDRATE POLYMERS (2014)
Horse chestnut (Aesculus Hippocastanum L.) starch=> basic physico-chemical characteristics and use as thermoplastic material Castaño, J.; Rodríguez-Llamazares, S.; Contreras, K.; Carrasco, C.; Pozo, C.; Bouza, R.; Franco, C.M.L.; Giraldo, D. Article Carbohydrate Polymers (2014)
Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage can C. Carrasco, G. Inzunza; C. Camurri, C. Rodríguez; L. Radovic, F. Soldera Article MaterialsScience & Engineering A (2014)
Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage cans Carrasco, C.; Inzunza, G; Camurri, C; Rodri?guez, C; Radovic L.; Soldera, F.; SUAREZ, S. Article ISI SCOPUS MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Photochemical synthesis of AZrO(3-x) thin films (A=Ba, Ca and Sr) and their characterization Cabello, G; Lillo L.; Caro, C; Chornik, B; Flores, M; Carrasco, C.; Rodriguez, CA Article ISI SCOPUS CERAMICS INTERNATIONAL (2014)
Photochemical synthesis of AZrO3␣X thin films (A1⁄4Ba, Ca and Sr) and their characterization Cabello, G.; Lillo, L.; Caro, C.; Buono-Core G.E., Chornik B.; Flores, M.; Carrasco, C.; Rodriguez, C.A. Article Ceramics International (2014)
Rolling of 316L stainless steel with rough rolls to potentially obtain superficial nanograins Camurri, C; Gallegos, A; Carrasco, C Article Journal of Materials Engineering and Performance (2014)
Rolling of 316L Stainless Steel with Rough Rolls to Potentially Obtain Superficial Nanograins Camurri, C; Gallegos Á.; Carrasco, C. Article ISI SCOPUS JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Preparation of poly(vinyl chloride)/ copper nanocomposite films with reduced bacterial adhesion A. Becerra, S. Rodríguez-Llamazares; C. Carrasco, J. Díaz-Visurraga; C. Riffo, M. A. Mondaca Article High Peformance Polymer (2013)
Preparation of poly(vinyl chloride)/copper nanocomposite films with reduced bacterial adhesion Becerra, A; Rodriguez-Llamazares, S; Carrasco, C.; Diaz-Visurraga, J; Riffo C.; Mondaca MA Article ISI SCOPUS High Performance Polymers (2013)
Efecto de la modificación superficial de alambres delgados de acero inoxidable AISI 302 mediante plasma electrolítico sobre sus propiedades mecánicas A. Gallegos, C. Camurri Article Revista de metalurgia (2012)
Effects of surface modification of thin wires of AISI 302 stainless steel by electrolytic plasma on its mechanical properties Gallegos Á.; Camurri, C; Carrasco, C.; Soldera, F. Article ISI SCOPUS Revista de Metalurgia (2012)
Impurities on cathodic copper=> Effect on the ductility of copper wires Camurri, Carlos; Carrasco, Claudia; Leite, Rodrigo; Mangalaraja, Ramalinga; Dille, Jean Article Journal of Materials Engineering and Performance (2012)
Influence of Impurities in Cathodic Copper on the Ductility of Copper Wires Camurri, C; Carrasco, C.; Leite R.; Mangalaraja, R.; Dille J. Article ISI SCOPUS Journal of Materials Engineering and Performance (2012)
Influence of Impurities in Cathodic Copper on the Ductility of Copper Wires Carlos Camurri, Claudia Carrasco; Rodrigo Leite, Ramalinga Mangalaraja Article Journal of Materials Engineering and Performance (2012)
Physical, chemical and mechanical properties of pehuen cellulosic husk and its pehuen-starch based composites J. Castaño, S. Rodríguez-Llamazares; C. Carrasco, R. Bouza Article Carbohydrate Polymers (2012)
Physical, chemical and mechanical properties of pehuen cellulosic husk and its pehuen-starch based composites Castaño J.; Rodriguez-Llamazares, S; Carrasco, C.; Bouza, R Article ISI SCOPUS Carbohydrate Polymers (2012)
Precipitation in a lead calcium tin anode Camurri C.G.; Carrasco C.A.; Colàs R. Article ISI SCOPUS Materials Characterization (2012)
Precipitation in a lead calcium tin anode Francisco A. Pérez-González, Carlos G. Camurri; Claudia A. Carrasco, Rafael Colás Article Materials Characterization (2012)
Processing and characterization of starch-based materials from pehuen seeds (Araucaria araucana (Mol) K. Koch) Castaño J.; Bouza, R; Rodriguez-Llamazares, S; Carrasco, C. Article ISI SCOPUS Carbohydrate Polymers (2012)
Processing and characterization of starch-based materials from pehuen seeds (Araucaria araucana (Mol) K. Koch). J. Castaño, R. Bouza; S. Rodríguez-Llamazares, C. Carrasco Article Carbohydrate Polymers (2012)
Study of major variables for the establishment of electrolytic plasma at low power Gallegos Á.; Carrasco, C.; Camurri, C; Pesenti H. Article ISI REVISTA FACULTAD DE INGENIERIA-UNIVERSIDAD DE ANTIOQUIA (2012)
Effect of processing parameters on the evolution of dislocation density and sub-grain size of a 12%Cr heat resistant steel during creep at 650 degrees C Rojas, D; Garcia, J; Prat, O.; Agudo, L; Carrasco, C.; Sauthoff, G; Kaysser-Pyzalla, AR Article ISI SCOPUS Materials Science and Engineering A (2011)
Effect of processing parameters on the evolution of dislocation densityand sub-grain size of a 12%Cr heat resistant steel during creep at 650°C D.Rojas, J. Garcia; O. Prat, C. Carasco; G. Sauthoff, A.R. Kaysser-Pyzalla Article Materials Science & Engineering A (2011)
Microstructural and mechanical properties of an Al-based MMC reinforced with Al2O3 particles produced by semisolid solidification C. Carrasco, C. Camurri; J. García, I. Perez de Arce; C. Montalba, O. Prat Article Materialwissencschaft und Werkstofftechnik – Materials Science and Engineering Technology (2011)
Microstructure investigations and mechanical properties of an Al-Al 2O 3 MMC produced by semi-solid solidification Carrasco, C.; Camurri, C; Montalba, C; Prat, O.; Rojas, D; Garcia, J Article MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2011)
Microstructure investigations and mechanical properties of an Al-Al2O3 MMC produced by semi-solid solidification Carrasco, C.; Camurri, C; Garcia, J; Montalba, C; Prat, O.; Rojas, D Article ISI SCOPUS Materialwissenschaft und Werkstofftechnik (2011)
Design and characterization of microstructure evolution during creep of 12% Cr heat resistant steels D. Rojas, J. Garcia; O. Prat, C. Carrasco; G. Sauthoff, A.R. Kaysser-Pyzalla Article Materials Science and Engineering A (2010)
Design and characterization of microstructure evolution during creep of 12% Cr heat resistant steels Rojas, D; Garcia, J; Prat, O.; Carrasco, C.; Sauthoff, G; Kaysser-Pyzalla, AR Article ISI SCOPUS Materials Science and Engineering A (2010)
Investigations on coarsening of MX and M 23C 6 precipitates in 12% Cr creep resistant steels assisted by computational thermodynamics Prat, O.; Rojas, D; Garcia, J; Carrasco, C. Article MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Investigations on coarsening of MX and M23C6 precipitates in 12% Cr creep resistant steels assisted by computational thermodynamics Prat, O.; Garcia, J; Rojas, D; Carrasco, C.; Kaysser-Pyzalla, AR Article ISI SCOPUS Materials Science and Engineering A (2010)
Investigations on Coarsening of MX and M23C6 Precipitates in 12% Cr Creep Resistant Steels Assisted by Computational Thermodynamics O. Prat, J. Garcia; D. Rojas, C. Carrasco Article Materials Science and Engineering A (2010)
Investigations on the growth kinetics of Laves phase precipitates in 12% Cr creep-resistant steels: Experimental and DICTRA calculations Prat, O.; Garcia, J; Rojas, D; Carrasco, C.; Inden, G Article ISI SCOPUS Acta Materialia (2010)
Investigations on the growth kinetics of Laves phase precipitates in 12% Cr creep-resistant steels=> Experimental and DICTRA calculations O. Prat, J. Garcia; D. Rojas, C. Carrasco and G. Inden Article Acta Materialia (2010)
Study of precipitation hardening in lead calcium tin anodes for copper electrowinning Camurri, C; Carrasco, C.; Prat, O.; Mangalaraja, R.; Pagliero A.; Colàs R. Article ISI SCOPUS Materials Science and Technology (United Kingdom) (2010)
Study of the precipitation hardening in lead calcium tin anodes for copper electrowinning C. Camurri, C. Carrasco; O Prat, R. Mangalaraja; A. Pagliero, R. Colas Article Materials Science and Technology (2010)
Survival of splinted mini-implants after contamination with stainless steel J. Jofre, Y. Conrady Article Int J. Oral Maxillofac Implants (2010)
Survival of Splinted Mini-Implants After Contamination with Stainless Steel Jofré J.; Conrady, Y; Carrasco, C. Article ISI SCOPUS INTERNATIONAL JOURNAL OF ORAL MAXILLOFACIAL IMPLANTS (2010)
Residual stress during heat treatment of steel grinding balls Camurri, C; Carrasco, C.; Dille J. Article ISI SCOPUS JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Stability of Cu-Li alloy in the rank of 298 to 673 K Ortiz, M; Carrasco, C.; Díaz P; Peñaloza, A. Article ISI REVISTA DE METALURGIA (2005)
Stability of Cu-Li alloy in the rank of 298 to 673 K Estabilidad de la aleación Cu - 2,5% Li en el rango 298 a 673 K Ortiz, M; Carrasco, C.; Díaz P; Peñaloza, A. Article SCOPUS REVISTA DE METALURGIA (2005)
Titanium nitride coatings on copper alloy prepared by dc reactive magnetron sputtering Carrasco, C.; Segers, L; Benavente, B; Vergara V. Article ISI SCOPUS JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Effect of nitrogen content on the microstructure and mechanical properties of CNx thin films de Sanchez, NA; Carrasco, C.; Prieto, P Article ISI SCOPUS PHYSICA B-CONDENSED MATTER (2003)
Hot consolidation of Cu-Li powder alloys: a first approach to characterization Camurri, C; Ortiz, M; Carrasco, C. Article ISI SCOPUS MATERIALS CHARACTERIZATION (2003)
Influence of the impurities on cathodic copper on the ductility of copper wires Carlos Camurri, Claudia Carrasco; Antonio Pagliero, Rodrigo Leite Article Materials Science Forum (0)
Obtention of an Al-based composite material by direct fusion of used beverage cans C. Carrasco, C. Montalba Article Materials Science Forum (0)
Optimal Precipitation Hardening Conditions in Lead Base Anodes for Copper Electrowinning C. Camurri, C. Carrasco; A. Pagliero, R. Colás Article Materials Science Forum (0)
Residual stresses during heat treatment of steel grinding balls C. Camurri, C. Carrasco; A. Pagliero, R. Colás Article Journal of Material Processing Technology (0)


On the use of flame analysis and optical variables for an optimized operation in ladle furnace preheating process Garces H.O.; Rojas A.J.; Arias L.E.; Carrasco C.A. ConferencePaper ISI SCOPUS 2015 IEEE Conference on Control and Applications, CCA 2015 - Proceedings (2015)
Influence of the impurities on cathodic copper on the ductility of copper wires Camurri, C; Leite R. ConferencePaper ISI SCOPUS Materials Science Forum (2012)
Obtention of an Al-based composite material by direct fusion of used beverage cans Montalba, C; Camurri, C ConferencePaper ISI SCOPUS Materials Science Forum (2012)
Optimal precipitation hardening conditions in lead base anodes for copper electrowinning Camurri, C ConferencePaper ISI SCOPUS Materials Science Forum (2010)
Thermal diffusivity of Al-Mg based metallic matrix composite reinforced with Al 2O 3 ceramic particles Cruz-Orea, A; Morales E.; Saavedra S R.; Carrasco, C. ConferencePaper Journal of Physics: Conference Series (2010)
Development of low carbon boron steel for wire drawing Camurri, C; Carrasco, C.; Bello, I.; Trucco, M ConferencePaper ISI PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5 (2007)
Temperature distribution, phase transformations and residual stresses in heat treatment of grinding balls Camurri, C; Carrasco, C.; Dille J. ConferencePaper ISI PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5 (2007)
Hot consolidation of Cu-Li powders alloys: A first approach to characterization Camurri, C; Ortiz, M; Carrasco, C. ConferencePaper ISI LIGHT METALS 2004 (2004)


SERC - Solar Energy Research Center FONDAP (15110019) Proyecto 2018-2023 Investigador(a)
AtaMoS-Tec Corfo (17PTECES-75830) Proyecto 2017-2023 Investigador(a)
"New energy sources=> Development of electrocatalytic anodes for acid water electrolysis" FONDECYT (1150270) Proyecto 2015-2018 Inv. Responsable
CREAT-e Network RISES Marie Curie Actions Proyecto 2015-2018 Inv. Responsable
Development of lead based anodes for copper electrowinning with improved mechanical and anticorrosion properties FONDECYT (1150005) Proyecto 2015-2018 Coinvestigador(a)
Improve of the Working Life of Steel Grinding Balls by Optimizing their Hardness and their Tenacity FONDECYT (1120002) Proyecto 2012-2015 Coinvestigador(a)
Secondary Aluminum Production=> A Novel Process to Produce Aluminum Metal Matrix Composite by Direct Melting of Used Beverage Cans FONDECYT (1120748) Proyecto 2012-2015 Inv. Responsable
NanoCom Network Marie Curie International staff exchange scheme (IRSES) Proyecto 2010-2013 Inv. Responsable
Impurities on Cathodic Copper=> Study of their Influence on the Ductility of Copper Wires and Development of Mechanical Tests Sensible to such Impurities FONDECYT (1095090) Proyecto 2009-2012 Coinvestigador(a)
Lead base anodes for copper electrowinning. Optimal precipitation hardening conditions for its appropriate working life FONDECYT (1070469) Proyecto 2007-2009 Coinvestigador(a)
Increasing the working life of grinding balls by means of a diminution residual stresses induced during heat treatment FONDECYT (1050078) Proyecto 2005-2007 Coinvestigador(a)
Obtaining and characterization of metal matrix composite materials produced by semisolid casting Fundación Andes Proyecto 2002-2004 Inv. Responsable

Oscar Farías

Profesor Asociado

Ingeniería Mecánica

Universidad de Concepción

Concepción, Chile

Jorge Jofré

Director

Centro de Rehabilitación Oral Avanzada e Implantología

UNIVERSIDAD DE CONCEPCIÓN

Concepción, Chile

MANGALARAJA Ramalinga Viswanathan

Profesor Titular

Departamento de Ingeniería de Materiales

UNIVERSITY OF CONCEPCION

Concepcion, Chile

Claudia Carrasco

Profesor Titular

Ingeniería de materiales

Universidad de Concepción

Concepción, Chile

Ljubisa Radovic

Professor

Chemical Engineering

UNIVERSIDAD DE CONCEPCION

Concepcion, Chile

Claudia Caro

UNIVERSIDAD DEL BÍO-BÍO

Chillán, Chile

Carlos Wörner

jubilado

Pontificia Universidad Católica de Valparaíso

Valparaíso, Chile

Gerardo Cabello

Académico

Ciencias Básicas

UNIVERSIDAD DEL BIO-BIO

Chillán, Chile

Marcos Flores

profesor asociado

departamento de física

UChile

santiago, Chile

Edward Fuentealba

Executive Director

Electrical Engineering

Universidad de Antofagasta

Antofagasta, Chile

Claudia Bernal

Academica

Departamento de Química

Universidad de La Serena

La Serena, Chile

Orlando Prat

UNIVERSIDAD DE CONCEPCIÓN

Concepción, Chile

Ricardo Salazar

PROFESOR ASOCIADO

QUÍMICA INORGÁNICA

Pontificia Universidad Católica de Chile

SANTIAGO, Chile

Myrna Sandoval

Profesor Asociado

Física

UNIVERSIDAD DE CONCEPCION

CONCEPCION, Chile

Alejandro ROJAS

Associate Professor

Ingeniería Eléctrica

Universidad de Concepción

Concepción, Chile

Luis Arias

Associate Professor

Electrical Engineering

University of Concepción

Concepción, Chile

Patricia Diaz

Academic

University of Connecticut Health Center

Farmington, CT, Estados Unidos

Cristobal Montalba

Docente/Investigador

Tecnologías Industriales

Universidad de Talca

Curicó, Chile

Yosselin Huentupil

Colaborador Académico

Universidad de Concepción

Concepción, Chile

Fabiola Pineda

Assistant professor

---

Universidad Mayor de Chile

Santiago, Chile

Hugo Garces

Profesor asociado

Ingenieria Informatica y Ciencias de la Computación

Universidad de Concepción

Concepción, Chile

FLAVIO DE BARBIERI

ACADEMICO JORNADA COMPLETA

DIMM

UNIVERSIDAD TECNICA FEDERICO SANTA MARIA

Valparaiso, Chile

CARLOS RODRIGUEZ

Académico Investigador

Instituto de Investigación Multidisciplinario en Ciencia y tecnología

UNIVERSIDAD DE LA SERENA

La Serena, Chile

Rodrigo Poblete

Saddys Rodríguez

Investigador

Centro de Investigación de Polímeros Avanzados

Concepción, Chile

Hector Pesenti

Academico

de Obras Civiles y Geología

Universidad Catolica de Temuco

Temuco, Chile

David Rojas

Docente

Materiales

Universidad de Cocnepcion

Concepción, Chile

Hugo Garcés

ACADEMICO

INGENIERIA INFORMATICA

UNIVERSIDAD CATOLICA DE LA SANTISIMA CONCEPCION

Concepción, Chile

Gerardo Cabello

Academico

Departamento de Ciencias Básicas

Universidad del Bio-Bio, Chile

Chillán, Chile

Victor Vergara

ACADEMICO

INGENIERÍA MECANICA

UNIVERSIDAD DE ANTOFAGASTA

ANTOFAGASTA, Chile

Johanna Castaño

Docente Investigador

Ingeniería Quimica

Universidad de Concepción

Concepción, Chile

Marisol Maril

Estudiante

Departamento de Ingeniería de Materiales

Universidad de Concepción

CONCEPCION, Chile

Pablo Tobosque

ESTUDIANTE

INGENIERIA DE MATERIALES

Universidad de Concepción

CONCEPCION, Chile

José Herrera

Carolina Lara

Estudiante Doctorado en Ciencia e Ingeniería de Materiales

Departamento de Ingeniería de Materiales

Universidad de Concepción

Concepción, Chile

Yasmín Maril

Investigadora

Ingeniería Mecánica

Universidad del Bío-Bío

Concepción, Chile

Claudia Andrea Carrasco Carrasco

Líneas de Investigación

Educación

Ingeniería metalurgica, UNIVERSIDAD DE CONCEPCION. Chile, 2002

ingeniero civil metalúrgico, UNIVERSIDAD DE CONCEPCION. Chile, 1995

Experiencia Académica

Profesor asistente Full Time

Profesor asociado Full Time

Profesor titular Full Time

Experiencia Profesional

Ingeniero Full Time

Formación de Capital Humano

Difusión y Transferencia

Premios y Distinciones

Reconocimiento Impacto de Publicaciones

Article (85)

ConferencePaper (8)

Proyecto (12)

SERC - Solar Energy Research Center

AtaMoS-Tec

"New energy sources=> Development of electrocatalytic anodes for acid water electrolysis"

CREAT-e Network

Development of lead based anodes for copper electrowinning with improved mechanical and anticorrosion properties

Improve of the Working Life of Steel Grinding Balls by Optimizing their Hardness and their Tenacity

Secondary Aluminum Production=> A Novel Process to Produce Aluminum Metal Matrix Composite by Direct Melting of Used Beverage Cans

NanoCom Network

Impurities on Cathodic Copper=> Study of their Influence on the Ductility of Copper Wires and Development of Mechanical Tests Sensible to such Impurities

Lead base anodes for copper electrowinning. Optimal precipitation hardening conditions for its appropriate working life

Increasing the working life of grinding balls by means of a diminution residual stresses induced during heat treatment

Obtaining and characterization of metal matrix composite materials produced by semisolid casting